1.Remove some of the attached trim. (armrest, pull strap, etc.) Disconnect all connectors from door panel to door. Remove it carefully so it can be replaced when completed.
2. Remove all screws or grind out all rivets holding the regulator to the door.
|
3. Secure the window in place, and remove the bolts.
4. Disconnect the motor’s wire harness, disengage regulator from window and fixed tracks.
5. Lift the motor and regulator out of the large access hole in the door.
|
6. Install the new regulator assembly into door and attach window. If necessary use new bolts with nuts and lock washers in place of the original.
7. Reconnect all connectors to door panel and test window.
8. Reinstall door panel
|