0.95 inch SPI 7P GND Full Color
Description:
100% Brand new and high quality.
Item name: 0.95 inch SPI OLED Display
Resolution:96*64
Color: 65536 Colors
Driver IC:SSD1331
1.GND-Gound
2.VCC-Positive Voltage
3.SCL-Clock Line
4.SDA-Data Line
5.RES-Reset
6.DC-Data/Demand
7.CS-Chip Select
Package Included:
1*0.95" Inch SPI OLED Display Module Full Color 65K Color SSD1331 7 Pin For Arduino
0.96 inch IPS 8P GND/Full Color
Display Module
Size: 0.96in
Material: New IPS color screen, brighter than ordinary TFT LCD
Resolution: 80*160 display direction can be adjusted, horizontal screen vertical screen can
Control chip: ST7735
Display Area:10.8X21.696(MM)
Physical size: 24*30(MM)
Interface Type: SPI Interface
Number of pins: 7PIN
Display color: 65K full color
Working temperature: -20-70°C
Operating voltage: 3.3V
Interface:
- GND
2.VCC
3.SCL
4.SDA
5.RES
6.DC
7.BLK
0.96 inch SPI 6P GND Blue/White/Yellow and Blue
Features:
No backlight, the display unit can be self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc.
Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters
Wide voltage support: without any modification, directly supports 3V ~ 5V DC
Working temperature: -30 ℃ ~ 70 ℃
Module volume (generous): 27.0MM * 27.0MM * 4.1MM
Minimum occupancy on Earth IO port display: The IIC/I2C communication, as long as the two IO ports will be able to drive!
Driver IC: SSD1306
No font: take the word with modulo software
1.3 inch I2C 4P GND White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: IIC interface
Pin Definition:
1>GND (power ground)
2>VCC (power supply)
3>SCL (clock line)
4>SDA (data line)
About the Control Chip SSH1106 Description:SSH1106 And SSD1306 are Basically Compatible,The Difference is That The SSH1106 Control Chip RAM is 132*64 Space,While the SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production. The Middle 128 Columns; When Using the SSD1306 Program Point SSH1106 Screen,You Only Need to Change The Starting Address to 0x02 Column.
1.3 inch I2C 4P VCC White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: IIC interface
Pin Definition:
1>VCC (power supply)
2>GND (power ground)
3>SCL (clock line)
4>SDA (data line)
About the Control Chip SSH1106 Description:SSH1106 and SSD1306 are Basically Compatible,the Difference is That The SSH1106 Control Chip RAM is 132*64 Space,While the SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production.The Middle 128 Columns; When Using the SSD1306 Program Point SSH1106 Screen,You Only Need to Change The Starting Address to 0x02 Column.
1.3 inch SPI 6P GND White/Blue
About 1106 and 1306 Chip Description:All 1.3-inch OLEDs on The Market Currently Use 1106 Chips,and 0.96 Selects 1306 Chips.1106 is Basically Compatible With 1306;Only 1106 is 132*64 RAM,1306 is 128*64 RAM;The Two Operation Commands are Compatible;Only 1.3 inch is Displayed From 0x02 Column;Modify it During Initialization Address;Both Programs are Compatible.
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock)
4>MOSI (Data Line)
5>RES (Reset)
DC (Data / Command)
1.3 inch SPI 7P GND White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: Default SPI Interface (Can be Modified To IIC)
Pin Definition:
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock Line)
4>MOSI (Data Line)
5>RES (Reset Line)
6>DC (Data / Command)
7>CS (Chip Selection line)
About the Control Chip SSH1106 Description:SSH1106 and SSD1306 are Basically Compatible,The Difference is That the SSH1106 Control Chip RAM is 132*64 Space,While The SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production.The Middle 128 Columns;When Using The SSD1306 Program Point SSH1106 Screen,You Only Need To Change The Starting Address to 0x02 Column.
1.3 inch SPI 8P GND White/Blue
1.3 inch OLED GBK2312 Simplified Chinese Character Library Version
GB2312 Character Set (6763 Chinese Characters): 15x16 Dot Matrix
ASCII Character Set (6 sets): 5x7~8x16 Dot Matrix
Disposition Method: Vertical Horizontal Row
Bus Interface: SPI Serial Bus
Support GB2312 National Standard Simplified Chinese Characters (Including the legal authorization of the National Beacon Committee)
Right), ASCII Characters.
Word Library Board 1.3 inch OLED Interface Definition
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock Line)
4>MOSI (Data Line)
5>DC (Data/Command)
6>CS1 (OLED Screen Selection)
7>FOS (Character Data Output)
8>CS2 (Word Chip Chip Selection)
0.95 inch SPI 7P GND Full Color
Description:
100% Brand new and high quality.
Item name: 0.95 inch SPI OLED Display
Resolution:96*64
Color: 65536 Colors
Driver IC:SSD1331
1.GND-Gound
2.VCC-Positive Voltage
3.SCL-Clock Line
4.SDA-Data Line
5.RES-Reset
6.DC-Data/Demand
7.CS-Chip Select
Package Included:
1*0.95" Inch SPI OLED Display Module Full Color 65K Color SSD1331 7 Pin For Arduino
0.96 inch IPS 8P GND/Full Color
Display Module
Size: 0.96in
Material: New IPS color screen, brighter than ordinary TFT LCD
Resolution: 80*160 display direction can be adjusted, horizontal screen vertical screen can
Control chip: ST7735
Display Area:10.8X21.696(MM)
Physical size: 24*30(MM)
Interface Type: SPI Interface
Number of pins: 7PIN
Display color: 65K full color
Working temperature: -20-70°C
Operating voltage: 3.3V
Interface:
- GND
2.VCC
3.SCL
4.SDA
5.RES
6.DC
7.BLK
0.96 inch SPI 6P GND Blue/White/Yellow and Blue
Features:
No backlight, the display unit can be self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc.
Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters
Wide voltage support: without any modification, directly supports 3V ~ 5V DC
Working temperature: -30 ℃ ~ 70 ℃
Module volume (generous): 27.0MM * 27.0MM * 4.1MM
Minimum occupancy on Earth IO port display: The IIC/I2C communication, as long as the two IO ports will be able to drive!
Driver IC: SSD1306
No font: take the word with modulo software
1.3 inch I2C 4P GND White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: IIC interface
Pin Definition:
1>GND (power ground)
2>VCC (power supply)
3>SCL (clock line)
4>SDA (data line)
About the Control Chip SSH1106 Description:SSH1106 And SSD1306 are Basically Compatible,The Difference is That The SSH1106 Control Chip RAM is 132*64 Space,While the SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production. The Middle 128 Columns; When Using the SSD1306 Program Point SSH1106 Screen,You Only Need to Change The Starting Address to 0x02 Column.
1.3 inch I2C 4P VCC White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: IIC interface
Pin Definition:
1>VCC (power supply)
2>GND (power ground)
3>SCL (clock line)
4>SDA (data line)
About the Control Chip SSH1106 Description:SSH1106 and SSD1306 are Basically Compatible,the Difference is That The SSH1106 Control Chip RAM is 132*64 Space,While the SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production.The Middle 128 Columns; When Using the SSD1306 Program Point SSH1106 Screen,You Only Need to Change The Starting Address to 0x02 Column.
1.3 inch SPI 6P GND White/Blue
About 1106 and 1306 Chip Description:All 1.3-inch OLEDs on The Market Currently Use 1106 Chips,and 0.96 Selects 1306 Chips.1106 is Basically Compatible With 1306;Only 1106 is 132*64 RAM,1306 is 128*64 RAM;The Two Operation Commands are Compatible;Only 1.3 inch is Displayed From 0x02 Column;Modify it During Initialization Address;Both Programs are Compatible.
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock)
4>MOSI (Data Line)
5>RES (Reset)
DC (Data / Command)
1.3 inch SPI 7P GND White/Blue
Resolution: 128*64
Control Chip: SSH1106
Display Area: 29.42*14.7 (mm)
Driving Voltage: 3.3-5V
Working Temperature: -40-70
Interface Type: Default SPI Interface (Can be Modified To IIC)
Pin Definition:
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock Line)
4>MOSI (Data Line)
5>RES (Reset Line)
6>DC (Data / Command)
7>CS (Chip Selection line)
About the Control Chip SSH1106 Description:SSH1106 and SSD1306 are Basically Compatible,The Difference is That the SSH1106 Control Chip RAM is 132*64 Space,While The SSD1306 is 128*64 Space and The 1.3 inch OLED is 128*64 Dot Matrix,so it is Taken During Screen Production.The Middle 128 Columns;When Using The SSD1306 Program Point SSH1106 Screen,You Only Need To Change The Starting Address to 0x02 Column.
1.3 inch SPI 8P GND White/Blue
1.3 inch OLED GBK2312 Simplified Chinese Character Library Version
GB2312 Character Set (6763 Chinese Characters): 15x16 Dot Matrix
ASCII Character Set (6 sets): 5x7~8x16 Dot Matrix
Disposition Method: Vertical Horizontal Row
Bus Interface: SPI Serial Bus
Support GB2312 National Standard Simplified Chinese Characters (Including the legal authorization of the National Beacon Committee)
Right), ASCII Characters.
Word Library Board 1.3 inch OLED Interface Definition
1>GND (Power Ground)
2>VCC (Power Supply)
3>CLK (Clock Line)
4>MOSI (Data Line)
5>DC (Data/Command)
6>CS1 (OLED Screen Selection)
7>FOS (Character Data Output)
8>CS2 (Word Chip Chip Selection)