Selling Point:

1. Easy installation, no polarity, no need for special chuck, plug and play
2. Good light type. The light distribution distance is 1mm, and the position of the luminous point is the same as the original halogen lamp, which does not affect the line of sight of the coming car.
3. High brightness. 3 times halogen light
4. Long life, no light. Full color 6063# aluminum, concave and convex appearance, increase the heat dissipation surface, perfect heat dissipation.
5. Save energy.

Parameter:

Model: H7
Voltage: 9-18V DC
Power: 23W (initial 28W)
Lumens: 2000LM (initial 2880LM)
Color: 6500K white
Lamp bead: LED
Use: Headlight (high beam, low light)
Life: 50,000 hrs

Package: 2x AUXITO H7 LED Headlight Light Bulbs

Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately

Product Overview:
The biggest selling point is that the size is small, the real 1:1 with the original car halogen, the installation does not require a special chuck, and the brightness is twice that of the direct-inserted H7 without a fan
The lumen value is about 2 times higher than the original halogen lamp, while the color temperature is higher than the halogen lamp, and the actual sensory effect is more than 3 times higher than the original halogen lamp

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Make sure to have the ignition turned off and the keys removed.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.