About this item

  • Dual Band Gigabit Speed: The UeeVii Wireless Bridge CPE features 2.4GHz 5.8GHz dual band connectivity, supporting both 2.4GHz 5.8GHz network equipments. Compared to single-frequency WiFi bridges, this dual-frequency support ensures compatibility with a wider range of devices and provides better stability and anti-interference ability; Also, this WiFi bridge supports fast speeds with a 100Mbps port and 1000Mbps ports, reaching a maximum transfer speed of 1200Mbps and network speed of 433Mbps.
  • Easy to Use: The 2-Pack Wireless Bridges come pre-paired and are plug and play, making it simple to use with point-to-point or point-to-multipoint applications (No technical knowledge required).
  • Long range up to 5KM: The outdoor wi-fi bridge point to point built-in a 16dBm directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km (barrier-free), and the actual application distance should be less than 5KM. Trees will not block the transmission speed of peer-to-peer internet wireless bridges, suitable for shops, warehouses or garages near home.
  • Network Expansion & Surveillance Expansion: This point-to-point internet bridge easily helps you extend the network range to a second building (barn, shop, warehouse, garage), or wirelessly extend the IP camera surveillance range. WDS networking mode, video network dual compatibility. IP65-rated weatherproof enclosure for continuous operation in harsh outdoor environments, ideal for outdoor use.
  • Support POE power supply: support 24V POE power supply, easy to install and deploy, simplify construction. The Ueevii wireless bridge performs in-depth protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission, smooth video surveillance, and in-depth optimization of the underlying wireless driver.  

Product Description

 
 
UeeVii CPE5824 WiFi bridge is widely used in warehouses, farms, and house lane monitoring systems. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission.
 
 
CPE5824 is a 5Km 5.8G wireless transmission equipment. It uses wireless communication technology to transmit network data using air as a medium to carry out long-distance PtP or PtMP interconnection. The working data link layer realizes the interconnection and transmission of local area networks.
 
 
 
 

How to Access and Setting the Wireless Bridge CPE Through Computer Access:

Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.

Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.

Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）

Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.

Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.

Step 6. Enter the account password "admin/admin" to access, and set it after successful access.

How to find and change CPE5824 WiFi SSID and password?

1. Find the WiFi hotspot password of CPE5824, path: Setting-->Wireless--> Name(SSID) and Password.

2. Enter the new SSID and password and save.

Am 29.11.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques