• Microprocessor Control (CPU).

• 3-STAGE AUTOMATIC CHARGING:

• This is a fully automatic battery charger with 3 charge stages.

• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

• 3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.

• Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..

• Switchmode technology: Yes

• Polarity protection: Yes

• Output short protection: Yes

• Non battery link protection: Yes

• Over voltage protection: Yes

• Over temperature protection: Yes

• Cooling:    Fan

• Input voltage: 100-240V AC, 50-60Hz

• Rated output: 12V DC, 5-6A Max.

• Minimum start voltage: 8.0V

• Battery range: 4-100Ah

• Thermal protect: 65'C+/-5'C

• Efficiency: App. 85%.

• Compliant standards: CB,CE, IEC60335, EN61000, EN55014

• Dimension (L×W×H): 150×85×60mm  

• Weight: 380g

How to use:

1 Please check your battery parameters before start charging to make sure it is compatible to the charger

2.Connect the red clamp to the positive pole(+) and black clamp to the negative pole(-).

3.Connect the charger with AC power source,and the charger will start to operate.

4.The LCD screen will show "FUL" status once the battery is fully charged

5 We suggest that you can keep the charged status in 1-2 hours after remove the charger.

Notice

Please do not charge the lithium battery.

Please turn off the power source before connecting or disconnecting to the battery.

Please note that the charger can not activate a dead battery or repair a battery which is damaged seriously and it also can not repair a battery back to 100% new.

Please adjust to repair mode 3-4 hours first for old/damaged battery,and then switch to charging mode to charge.