Digital Optical Audio Splitter 1x3, SPDIF Toslink Optical Fiber Audio Splitter 1 in 3 Out
Specifications:
Support audio format: LPCM2 0/DTS/Dolby-AC
Input Optical Format: Dolby Digital & DTS 5.1, PCM Stereo 32kHz, 44.1kHz, 48kHz, 96kHz and 192KHz
Output Optical Format: Dolby Digital & DTS 5.1, PCM Stereo 32kHz, 44.1kHz, 48kHz, 96kHz and 192KHz
Power supply: DC5V/1A
Features:
1. Aluminum Alloy Design: Overall Shielding without Signal Interference, Ensure high-quality audio signal
2. Transmission distance up to 40m via optical fiber cable that losses less than 0.2dB/m,sampling frequency up to 96 KHz
3. Over-voltage protection can prevent the damage caused by connecting unmatched power dapter to the machine.
4. This Toslink splitter splits a single SPDIF (Toslink) Digital Optical Audio signal into three outputs. It allows you to connect a single optical audio source,
such as the output of a gaming console or Blu-ray player, to three devices, such as a television and an AV receiver,or amplifier. Provide clean, accurate audio, with no distortion or signal interference
Includes:
1x Optical Audio Splitter 1x3
1x Micro USB Power cable
1x Power adapter
1x Optical Cable
1x User Manual
Note:
1. If there is no sound output.
a, Check the signal receiving equipment and the machine connected are in good condition.
b, Check if the signal source is on and well connected.
c, Check the system connection quality.
d, Check if the line is all quality.
2. If sound interrupted, please try again to connect the cable to be free from the unsuccessful connection.
3. 7.1CH Dolby Digital Plus and Dolby Trued are not supported because 7.1-channel audio cannot be transmitted through fiber optic cables and must be transmitted through HDMI cables.