The light meter is an instrument used to accurately determine the amount of exposure required by the subject.

Description:

Features:

Long standby , continuous metering for 28 hours.

High accurancy, 0.1100,000 .

32-bit MCU with high accurancy sensing.

Support reflection metering, incident metering.

Support multiple -ports.

Parameter memory function.

Adjustable reflectivity.

Specifications:

Metering angle: 45° average metering (default reflected light, can also be set to incident light)

Display screen: 0.96 inch 0LED

Battery Capacity: 3.7V, 300mAh

Charging specification: 5V/450mA

Aperture : F1.0-F64

Shutter : 4.0S - 1/2000S

ISO range: ISO6~ISO6400

Working current: 8mA-10mA

Standby current: 3.5μA

Reflected EV : -2.0-19.0

Incident EV : -4.5-15.5

Exposure compensation : -5.0+5.0

Power supply mode: lithium battery (can be used for about 28 hours of continuous metering)

Support metering while charging, you can also choose to shut down when charging

Three elements of exposure (gear description):

Aperture F, the of gear can be set as follows:

F/1.0, 1.2, 1.4, 1.8, 2.0, 2.5, 2.8, 3.2, 3.6, 4.0, 4.5, 5.0, 5.6, 6.3, 6.7, 7.1, 8.0, 9.0, 9.5, 10, 11, 13, 14, 16, 18, 19, 20, 22, 25, 29, 32, 45, 64

Shutter T, the of gear can be set as follows:

30s, 15, 8, 4, 3, 2, 1.6, 1.3, 1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50,1 /60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,1 /320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/4000, 1/8000s

Sensitivity IS0, the of gear can be set as follows:

6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1600, 3200, 6400, 8000

Package size: 180 * 130 * 60mm / 7.1 * 5.1 * 2.4in

Package weight: 160g

Instructions:

1. After receiving the goods, it is recommended to fully c-harge it before using

2. Metering: continuous metering starts when it is turned on, and stops metering when turned off.

3. The operation dial on the right rear side of the machine has three operation modes, press forward, press backward, and press inward (leftward).

4. Selection of priority mode: operate the dial to go in (left) and press to modify the priority mode.

5. When the screen- points to the aperture value, it indicates the aperture priority mode. Press the dial forward or backward to increase or decrease the value. Long press the dial forward or backward to quickly adjust the value.

6. The- on the screen points to the shutter , indicating the shutter priority mode, the same dial can adjust the value.

7. Long press the dial in (left) for more than 1 second to set the sensitivity. At this , the screen- points to ISO. Press again to exit the sensitivity setting. When the sensitivity is set, the machine can also measure light continuously.

Packing List:

1 * Light Meter

1 * Cable

1* charger