110/220V Tongue Internal Grinder Dental Technician Tool JT-17 Tongue Dresser Tongue Plaster Restoration Dental Materials

Motor power for 100 years, 4500 rpm, 220V/50 (110V/6082)
1. After powering on, first check whether the operation is normal. If it does not work normally, please check whether the fuse built in the power socket is blown. If yes, please replace it in time (10A):
2. When working, the front end frequency of the rotation law is 0.5-1mm lower than the plane of the worktable. To ensure effective grinding:
3. If you need to replace the rotating zinc or adjust its working height, please turn the dust cover 90 degrees, and use two accessory wrenches to clamp the upper spindle and the lower lock nut to loosen or clamp them. After the work is leveled, the dust prevention source is still restored.
4. During work, the hose of the vacuum cleaner must be inserted into the mouth of the dust discharge joint and work with the vacuum cleaner. If too much dust accumulates in the toner cartridge after long-term work, you can remove the bottom cover, and then remove the toner cartridge to clean up the dust inside the cartridge.
5. Pay attention to operational safety.
1. When the machine is turned on, it is strictly prohibited to touch the rotary file by hand:
2. Operation with gloves is strictly prohibited.

Note: Due to the different batches produced, the model will be different, the parameters and operating functions are the same, please rest assured, if you mind, shoot carefully