Store Categories
Product Overview
Details
*1 Meters For Capricorn Premium XS bowden Tubing
*Inner Diameter (mm):1.90 +/- 0.05
*Outer Diameter (mm):3.95 +/- 0.05
*Melting Point:up to 340 Celsius
*Colour:blue, silver, gold
*Material:metal, PTFE, brass
(1) 1 Meters for Capricorn XS Bowden PTFE tubing with lowest friction on the market.
(2) Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
(3) 1 * PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
(4) 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend.
*1 x 1M for Capricorn Premium XS bowden Tubing
*1 x PTFE PTFE Tube Cutter
*2 x PC4-M6 pneumatic fittings
*2 x PC4-M10 pneumatic fittings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2018 DataCaciques
Product Overview
Details
*1 Meters For Capricorn Premium XS bowden Tubing
*Inner Diameter (mm):1.90 +/- 0.05
*Outer Diameter (mm):3.95 +/- 0.05
*Melting Point:up to 340 Celsius
*Colour:blue, silver, gold
*Material:metal, PTFE, brass
(1) 1 Meters for Capricorn XS Bowden PTFE tubing with lowest friction on the market.
(2) Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
(3) 1 * PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
(4) 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend.
*1 x 1M for Capricorn Premium XS bowden Tubing
*1 x PTFE PTFE Tube Cutter
*2 x PC4-M6 pneumatic fittings
*2 x PC4-M10 pneumatic fittings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
We can only accept payments via eBay check out. If you have any questions about the payment,please contact us through eBay message.
By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing. Please ensure to read and agree to All eBay terms and Conditions before bidding.
All pictures are for illustration purpose only and colours may vary slightly.
Our store obeys all eBay Rules and Policies.
Once payment is made we can only ship to the address shown on the checkout page without any changes or modification to that address. Please make sure your eBay address is correct before you pay.
It will takes about 7-14 business days for delivery. We will arrange shipping for you within 1-3 business days after payment cleared except the holidays.
If your shipment delays, we hope you can be patient, and at the same time contact us, we will try our best to help you.
We offer 30 days return.
We are not responsible for any purchase after this 30-day period.
You must contact us as soon as you have decided to cancel. If your order has not been despatched it will be cancelled and you will be issued with a full refund.
However, if your order has been despatched you will be liable for return postage costs.
Please note that we cannot give refunds after the 30 day limit has expired.
A full refund will be issued as soon as the goods are received back.
We do our best to process as quickly as possible.
If you have any questions, please do not hesitate to contact us through eBay’s messaging system.
It’s the fastest way to get a reply; most questions are answered within an hour.