This M.NT68676 LCD controller kit is used to turn LCD panel into Raspberry Pi and A1U gaming monitor. It provides HDMI/ VGA/ DVI video input port.
Compatible 17" (1280 x 1024):
- LM170E03
- LTM170EU, LTM170EH, LTM170E5, LTM170E6
- M170EG01, M170EG02, M170EN01, M170EN04, HSD170ME13
- M170EN05, M170EN06
Compatible 19" (1280 x 1024):
- G190EG01
- HSD190ME11, HSD190ME12, HSD190ME13
- LTM190EX, LTM190E1, LTM190E2, LTM190E3
- LM190E02, LM190E03, LM190E08,
- LM190E05-SL03
- M190E5, M190EG02, M190EG03, M190EN01
Important Note:
- Video cable and Power adapter are NOT included
- Supplier may update LCD controller board or cables sometimes, so they may not same as the picture
- If you are not specialized in electronics or have doubts in operation, please CONTACT US, we are not responsible for wrong operation
Packing List (bulk pack):
Features:
- M.NT68676 is a monitor control board which can support LCD panels
- Specific driver is pre-installed
- Synchronize with computer automatically. Synchronization requires the synchronous signal which horizontal and vertical sync are separated
- Support dynamic contrast control, headphone input and digital volume control simultaneously
- Size of controller: 139mm x 58mm x 17mm
How to Use:
- Take away the old inverter and old LVDS cable from LCD panel
- Connect the new inverter and LVDS cable to your LCD panel
- Connect driver board with PC by VGA/ DVI/ HDMI cable
- Set the voltage jumper, please don't connect the lvds cable wrongly, wrong setting and connection will get your LCD burnt
- Test GND, and red/ black wires by multi-meter
- Input power of 12V 3A