ELM327 FORScan For Ford USB Adapte OBD2 Scanner Car Code Reader MS-CAN HS-CAN
 ELM327 USB V1.5 modified for Ford ELMconfig CH340+25K80 chip HS-CAN / MS-CANSupported softwarELMconfig

Forscan

FOCCCUS

FF2

Please note:

1: ELMconfig special - speed set to 500kbit - FoCCCus FF2

2: MS-CAN support (MS-CAN / HS-CAN switch)

3: HS-CAN mode can reach 500000 baud (500kBit) rate(* Constant speed set to 500000 baud (500 kbit))

Note: The Driver is for 32 /64 bite Windows.

 


Compared with ordinary ELM327 USB Diagnostic Cable, our Forscan Cable can be used as two different tools：

1. It can be equipped with ordinary ELM327 software to do ordinary ELM327 functions. It can be equipped with scanmaster, scantool and other software, applicable to all car series (Forscan ELM327 and Forscan pro can be used, ELS27 can not)

2. Supporting FORSCAN, ELMconfig, FOCCCUS, FF2 software, specially designed for Ford series, Mazda, Lincoln and Mercury cars (ELS27 can only use these software)

Supported models：

All Ford(Cars & Fseries Trucks 12V), Mazda, Lincoln, Mercury vehicles .

It is 99% of models after 2000 and around 92% of models after 1996 (the year when OBD2 became a standard in USA).

 

Note: New 2019+ Mazda 3 and CX-30 are not supported yet.


Why do you need an Extend license？

1. This license is not restricted by us, it is restricted by the forscan software provider

2. Used to restrict access to key functions. For example, PATS key programming function. If the software is completely released, all the software and the Forscan ELM327 cable can program a new car key in a few seconds. This is too insecure for all users.

Those modules need Extend license：

Service -> PATS Programming

Configuration and Programming -> Module Configuration

Configuration and Programming -> Module Configuration(AS BUILT format)

Configuration and Programming -> Central Configuration

Configuration and Programming -> Module Reset/Configuration (required to learn central configuration changes related to these modules)

 


 

 

1. With best PIC18F25K80 Chip:

0 (1)0 (2)

2. Add functionality for Ford cars, Even support hidden function for ford Focus Mondeo Kuga.

(Hidden function Support car list: 2006-2016 classical for Focus , 2012-2015 new for Focus , 2013-2015 Kuga)

3. Powerful Softwares Compatible:FORScan, Elmconfig, FF2 and FoCCCus, Scanmaster plus more

4. Special Design with Switch : connect different CAN buses , such as MS CAN bus and HS CAN bus

5. Drivers and instructions included,Easy to install.

6. The most stable Hardware V1.5 , Support all OBD2 Protocols

 

7. Supported Langauges:

-----When starting HS function, it supports 12 Languages:

English,Czech,Danish,German,French,Spanish,Hungarian,Italian,Polish,Turkish,Serbian,Croatain

-----When starting MS CAN function, it supports Language: English & Russian.

8. Supported softwares:FORScan, Elmconfig, FF2 and FoCCCus,Scanmaster plus more


 

9. Supported cars:

Especially for Ford, for Mazda, for Lincoln, for Mercury vehicles And other OBD2/EOBD universal car models.

10. Supported protocols:

for FORD HS CAN

for FORD MS CAN

SAE J1850 PWM(41.6Kbaud)

SAE J1850 VPW(10.4Kbaud)

ISO9141-2(5 baud init,10.4Kbaud)

ISO14230-4 KWP(5 baud init,10.4 Kbaud)

ISO14230-4 KWP(fast init,10.4 Kbaud)

ISO15765-4 CAN(11bit ID,500 Kbaud)

ISO15765-4 CAN(29bit ID,500 Kbaud)

ISO15765-4 CAN(11bit ID,250 Kbaud)

 

Advantages:

 

Support FORD models open hidden function Focus Mondeo Kuga
MS-CAN support via toggle switch(MS-CAN / HS-CAN)
ELM327 USB has full support to Ford specific diagnostic protocol MS-CAN.
Majority of modern Ford modules are accessible only through this protocol.
 
Support FORD models open hidden function.
Besides added functionality for Ford, this device works as normal OBD2/EOBD code reader on all supported vehicles.

Functions:

* read/erase fault codes from ALL modules, including OBD2/EOBD

* access modules on both HS-CAN and MS-CAN mode

* read vehicle configuration

* actuator tests

* Live Data

* injector coding

* software updates

* service procedures

* force DPF regeneration

* programming

* coding

* adaptations

ELM327 USB V1.5 OBD2 you will be able to:
•Read and clear diagnostic trouble codes
•Air Flow Rate
•display and read
•Engine RPM
•Vehicle Speed
•Intake Air Temperature
•Long Term Fuel Trim
•Short Term Fuel Trim
•Timing Advance
•Oxygen Sensors
•Fuel System status

•and so much more!

 

ELM327 USB Switch Support Car List:

For FORD

For MAZDA

For BMW

For VW

For

For AUDI

For CHEVY

For TOYOTA

For LEXUS

For Lincoln

For MERCEDES

For Mercury

For HYUNDAI

For KIA

For MITSUBISHI

For NISSAN

For SUZUKI

For JAGUAR

For LAND ROVER

For CHRYSLER

For HONDA

AND SO MUCH MORE!

Modified EML:

Please note that many for Ford and for Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.

ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.


Pin Configurations:

Switch position one: HS CAN - Occupies pins 6 and 14

Switch position two: MS CAN - Occupies pins 3 and 11

ELM327 USB Switch Packing List:

1*ELM327 USB Switch

1*CD

We can Only accept Paypal Payment.

And ONLY Ship item to Paypal Address.

1. The item will be shipped out via SpeedPAK/ DHL/ EMS/ FEDEX/ UPS/ China Post/ UPS/ YANWEN

2. We will ship your order within 48 hours upon Receiving Cleared Payment except Weekend and Public Holidays.

3. Turkey, Brazil, Saudi Arabia, Russian, Greek, Belarus, Ukraine, Romonia these countries we only offer EMS/ Aramex/ YANWEN/ China Post service.

4. It will take 3-7 working days via DHL/FEDEX/UPS/ARAMEX, 10-25 business days via EMS, 10-90 working days via China post/other Post Office. 

If your place is a remote area on DHL / UPS Extended Area Surcharge (EAS) Definitions, you may have to pay additional 36USD as Remote surcharge, that is not included in Shipping fee or Price.

Recently the Post announced that all items shipping by air are now subject to x-ray screening for regulated materials. This additional screening has cause delay in shipment. Please be aware that delivery may take a few days longer than usual. Your patience is greatly appreciated.

We Are only Human and mistakes do occasionally happen, if you receive the wrong item, please contact us via Ebay Message Center.

We will forward you a Post office FREE POST return label for the incorrect item.

Then the correct item will then be shipped out.

If you are not 100% satisfied with your item we will gladly accept it back for a full refund provided your initial request to return the item is within 30 days from the date of purchase. If your initial request to return the item is after 30 days from the date of purchase unfortunately we would be unable to accept the return request.

All returns must be received in perfect re-saleable condition in order for refunds to be granted. If the item you return does not arrive in perfect re-saleable condition we cannot offer any refund.

All returned items must be accompanied with a copy of the original sales invoice and or return slip and number Once your item has been returned to us, your refund will be processed within 48 hours.

If the return is for a faulty or damaged item we will provide a pre-paid returns label. If the return is due to a buyer changing their mind or just doesn’t want the item return costs will be at their own expense.

obd2pro,a seller of automotive diagnostic tools you can trust
PushAuction