Canbrush All Purpose Spray Paint Aerosol Fast Drying Metal Wood Plastic 400ml 

Many shades and texture, Please select from the dropdown menu. 

Please see the Colour charts provided by the manufacturer. The paint can, colour sticker or the cap may vary due to the lighting,  camera resolution, your display brightness and pixel of your screen. 
In the event of confusion colour chart is ACCURATE. 
As a seller we CANNOT be held responsible for ordering the wrong colour. 

About Candy Tone Range:  

These colours are translucent and can be sprayed over any base coat, including white and chrome paint. 

The final colour and darkness of the finish depends on the colour and darkness of the base coat and the number of candy coats applied

TIP: Use sparkling silver as base coat for the best results

About Sparkling Range : 

This paint is from the sparkling colour range. It can reveal the contours of an object better than solid colours. The small metal flakes included in the paint create a sparkling effect resulting in a rich and exotic look

  • High durability and weatherproof
  • An elegant metallic finish
  • Quick-drying and easy to spray
  • Available in 9 colours
                                    About Fluorescent Range :

A high visibility fluorescent coating that gives striking results in any ambient lighting.

 Please pick your application of this product carefully due to limited lightfastness.

TIP: Use white as a base coat for best performance.

Application Steps:

Step 1: 

  • Before starting, always read instructions on aerosol can carefully
  • Ensure you are in a well ventiated area
  • Prepare and cover the area you are planning to do your spray painting with some old newspaper

Step 2:

  • Make sure the surface of the object to be painted is clean, degreased and dry
  • Sand the rough surface with fine grain sand paper and remove the dust with a tack cloth

Step 3:

  • Practice your spraying technique to determine the spraying distance, the speed of the application etc

Step 4:

  • Try to paint in straight passes from beginning to end and be sure to overlap slightly on each stroke to prevent sagging

Step 5:

  • Apply primer using the steps above before applying your favourite coat to improve adherence and durability

Step 6:

  • Apply multiple thin coats, allowing each coat to dry slightly before applying the next

Step 7:

  • Clean the nozzle after use to prevent blockage. To do this, invert the can and press the nozzle a few times until transparent propellant comes out.

Please note:

  • Due to printing limitations, the colour may vary from the cap and can colour.
  • 400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.
  • 200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.
  • The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.
  • We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.



Important: By purchasing this you are declaring that you are the person of above 18 years old. This is an age restricted product, not to be sold to the underage (You must be over 18)