DC12~50V / DC12~24V High Power Hot Bed Module MOS Tube Expansion Board
1.Universal heated bed power extension module high power module for 3D printers.
2. Can be used for Chitu motherboard and other open 3D printer motherboards.
3. Helps 3D printers equipped with controller boards (up to 15A) to become more powerful.
4. Use this add-on module for board leads up to 25A.
5. This module is recommended if you intend to use a heated bed with a 3D printer that uses a 12V power supply, otherwise it may cause too much current and may burn out the connectors on the controller board.
Color: Black
Voltage: DC12-24V
Maximum current: 25A (enhanced heat dissipation)
1. When connecting the power cord, you need to pay attention to distinguish the positive and negative poles
2. Module placement problem: When using the module, do not place it in a place with dense wires. This will help reduce the heating burden of the module and improve safety
3. When the module is working: do not let the conductor touch its bottom
4. high-power use, to enhance heat dissipation this module can bring 25A stable output
5. Current output, the current size is determined by the load
1 x high power heat bed module
1 x 20cm signal cable
DC12-50V
1.upgraded version of the hot bed high-power module, the terminal end of the new insulation protection cover to prevent leakage and avoid electrocution.
Electricity safer, use more at ease!
2. Hot bed high-power expansion module
3. Compact and atmospheric appearance
4. Unique appearance of the snowflake heat sink design, heat dissipation more powerful
5. Solve the problem of current load due to excessive power of the hot bed
Power supply voltage: DC12-50V
1 x Module
1 x Mainboard PWM 20CM signal control cable
2 x 30cm power supply red and black wiring
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
1.Universal heated bed power extension module high power module for 3D printers.
2. Can be used for Chitu motherboard and other open 3D printer motherboards.
3. Helps 3D printers equipped with controller boards (up to 15A) to become more powerful.
4. Use this add-on module for board leads up to 25A.
5. This module is recommended if you intend to use a heated bed with a 3D printer that uses a 12V power supply, otherwise it may cause too much current and may burn out the connectors on the controller board.
Color: Black
Voltage: DC12-24V
Maximum current: 25A (enhanced heat dissipation)
1. When connecting the power cord, you need to pay attention to distinguish the positive and negative poles
2. Module placement problem: When using the module, do not place it in a place with dense wires. This will help reduce the heating burden of the module and improve safety
3. When the module is working: do not let the conductor touch its bottom
4. high-power use, to enhance heat dissipation this module can bring 25A stable output
5. Current output, the current size is determined by the load
1 x high power heat bed module
1 x 20cm signal cable
DC12-50V
1.upgraded version of the hot bed high-power module, the terminal end of the new insulation protection cover to prevent leakage and avoid electrocution.
Electricity safer, use more at ease!
2. Hot bed high-power expansion module
3. Compact and atmospheric appearance
4. Unique appearance of the snowflake heat sink design, heat dissipation more powerful
5. Solve the problem of current load due to excessive power of the hot bed
Power supply voltage: DC12-50V
1 x Module
1 x Mainboard PWM 20CM signal control cable
2 x 30cm power supply red and black wiring
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 27.12.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: