Sophisticated product, please handle with care; quality first, credit upmost;  Your satisfaction is our pursuit;The strength of technology decide the quality of technology.                                         if  you have any problem,pls contact with us.

LCD Display Module 20x4 Character Gray Screen White Backlit DC 5V LCM2004A

Product Feature:
1. Made of high quality material, durable and practical.
2. Wide temperature glass for clearer display.
3. Fully automatic electroplating line, environmentally friendly materials, uniform electroplating, good corrosion resistance.
4. AIP31066 or SPLC780D controller (COB process).
5. Standard 1x16 pin interface, widely used.
 
parameter:
Product Model: LCM2004A
Dimensions: 98.0mmX60.0mm
Display content: 20 characters X4 lines
Interface mode: single row parallel port
Working voltage: 5V
Controller: SPLC780D
LCD operating temperature: -20℃~70℃
LCD storage function: -30℃~80℃
Wide temperature LCD: -30℃~80℃
 
Precautions:
Liquid crystal displays are made of glass, organic sealants, organic fluids, and polymer-based polarizers. When handling, pay attention to the following:
1. Keep the temperature within the range of use and storage. Excessive temperature and humidity can cause polarization degradation, polarizer peeling, or air bubbles.
2. Do not touch the exposed polarizer with anything harder than HB pencil lead. Remove the dust from the surface of the monitor, gently use cotton
To wipe, soak a deerskin towel or other soft material in cleaning oil.
3. Immediately wipe off saliva or water droplets. Excessive contact time of ITO with water will cause deformation or discoloration of the surface of the liquid crystal display.
4. Glass is easily broken due to rough handling. Especially in corners and edges.
5. Do not drive the LCD with DC voltage.
 
welding:
1. Solder to I/O terminals only.
2. Only use a soldering iron that is properly grounded and has no leakage.
3. Soldering temperature: 280℃±10℃
4. Welding time: 3 to 4 seconds.
5. Low temperature solder filled with resin flux.
6. If flux is used, the LCD surface should be covered to avoid flux spattering. Flux residues should be removed after shielding.
 
operate:
1. The viewing angle can be adjusted by changing the LCD driving voltage V0.
2. The driving voltage should be kept within the specified range. Excessive voltage will shorten the life of the display.
3. The response time increases with decreasing temperature.
4. At temperatures above its operating range, the display may turn black or dark blue; this (but do not press
domain) may cause some display segments to "break".
5. Mechanical damage during operation (such as pressing the display area) may cause the line segment to "break".
 
Package list:
LCM2004A LCD screen*1

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

LCD Display Module 20x4 Character Gray Screen White Backlit DC 5V LCM2004A
Product Feature:
1. Made of high quality material, durable and practical.
2. Wide temperature glass for clearer display.
3. Fully automatic electroplating line, environmentally friendly materials, uniform electroplating, good corrosion resistance.
4. AIP31066 or SPLC780D controller (COB process).
5. Standard 1x16 pin interface, widely used.
 
parameter:
Product Model: LCM2004A
Dimensions: 98.0mmX60.0mm
Display content: 20 characters X4 lines
Interface mode: single row parallel port
Working voltage: 5V
Controller: SPLC780D
LCD operating temperature: -20℃~70℃
LCD storage function: -30℃~80℃
Wide temperature LCD: -30℃~80℃
 
Precautions:
Liquid crystal displays are made of glass, organic sealants, organic fluids, and polymer-based polarizers. When handling, pay attention to the following:
1. Keep the temperature within the range of use and storage. Excessive temperature and humidity can cause polarization degradation, polarizer peeling, or air bubbles.
2. Do not touch the exposed polarizer with anything harder than HB pencil lead. Remove the dust from the surface of the monitor, gently use cotton
To wipe, soak a deerskin towel or other soft material in cleaning oil.
3. Immediately wipe off saliva or water droplets. Excessive contact time of ITO with water will cause deformation or discoloration of the surface of the liquid crystal display.
4. Glass is easily broken due to rough handling. Especially in corners and edges.
5. Do not drive the LCD with DC voltage.
 
welding:
1. Solder to I/O terminals only.
2. Only use a soldering iron that is properly grounded and has no leakage.
3. Soldering temperature: 280℃±10℃
4. Welding time: 3 to 4 seconds.
5. Low temperature solder filled with resin flux.
6. If flux is used, the LCD surface should be covered to avoid flux spattering. Flux residues should be removed after shielding.
 
operate:
1. The viewing angle can be adjusted by changing the LCD driving voltage V0.
2. The driving voltage should be kept within the specified range. Excessive voltage will shorten the life of the display.
3. The response time increases with decreasing temperature.
4. At temperatures above its operating range, the display may turn black or dark blue; this (but do not press
domain) may cause some display segments to "break".
5. Mechanical damage during operation (such as pressing the display area) may cause the line segment to "break".
 
Package list:
LCM2004A LCD screen*1

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.


Am 27.12.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques