Feature:
1: Widely used
2：Beautiful appearance
3：Convenient and simple
4: 1M waterproof cable probe
5: Easy to set up and understand
 
Specification:
Product name:Microcomputer temperature controller
Temperature measuring range:-50~110~c
Temperature control range:-50~110℃
Temperature measurement accuracy:±0.2℃
Temperature control accuracy:±0.1℃
Measurement input: NTC10K L=1m waterproof probe
Input power:110V-220V
Output power:1500W
Output type:Direct output
Output capacity:max 10A
External dimensions:120*59*30mm
Code and function introduction
PO set start temperature
Press the set button to enter the internal menu, the default display is P0. Press the set button again to set the desired start temperature by pressing the up and down buttons.
P1 to set the stop temperature
Press the Set button to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the Set button again and set the desired stop temperature by pressing the up and down buttons.
P2 to set the temperature correction
Enter the internal menu in the same way, switch to P2 using the up and down buttons, press the set button again and set the desired calibration temperature using the up and down buttons. In the setting, if the detected temperature value is 0.5°C greater than the actual temperature value, then the desired calibration temperature is set to -0.5°C. If the detected temperature value is 0.5°C greater than the actual temperature value, then the desired calibration temperature is set to -0.5°C. If the detection temperature value is 1°C less than the actual temperature value, the calibration temperature to be set is 1°C. Detection temperature ± calibration temperature = actual temperature.
P3 Setting delayed start
Enter the internal menu in the same way, switch to P3 via the up and down keys, press the setting key again and set the desired delay time (in minutes) via the up and down keys. The delayed start is generally used for compressor cooling, if it is used for refrigerator freezer, this value needs to be set, depending on the size of the compressor back pressure the general setting value is 3-6 minutes, if you are not used to control the compressor or do not need the delay function, directly skip this item
 
Heating mode setting method:
Setting key: start temperature < stop temperature (the program automatically determines the working mode as heating mode)
Setting method:
Press the set button to enter the internal menu and set the start temperature by setting the P0 value and the stop temperature by setting the P1 value.

Example of use:
Controlling the water heater, the heating stops at 50°C, the temperature drops back to 40°C and the heating starts again, how do I set it?
Step 1: Make sure the working mode is heating mode, start temperature < stop temperature
Step 2: Press the set button to enter the internal menu, select P0 and press the set button to set the P0 value to 40°C
Step 3: Press the set button to enter the internal menu, select P1 and press the set button to set P1 to 50°C
 
Cooling mode setting method:
Setting key:Start temperature>Stop temperature (the program automatically determines the working mode as cooling mode)
Setting method:
Press the Set key to enter the internal menu, set the start temperature by setting P0 and the stop temperature by setting P1.
Use case:
To control a cabinet radiator, stop the radiator at 26°C and start the radiator again when the temperature rises to 30°C. How do I set this?
Step 1: Make sure the working mode is cooling mode, start temperature > stop temperature
Step 2:Press the set key to enter the internal menu, select P0 and press the set key to set the P0 value to 30°C
Step 3: Press the Set button to enter the internal menu, select P1 and press the Set button to set P1 to 26°C.
Tip:
When setting the heating mode, if the set temperature value is reversed accidentally, the output indicator will not light up and the load will not work, if the above situation occurs after setting, you can check if the set temperature value is reversed

Package Included:

1PC

Note: 

1.We can offer bulk price, if you need large quantity, please feel free to send a message to consult customer service for wholesale price.

2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!