Aluminum Alloy Digital Power Supply Tester Diagnostic Tools 20/24 Pin Computer Power Measuring Multifunction for ATX BTX ITX TFX
Feature:
1. Overview: The LCD power tester is a powerful power test equipment. This power tester only needs to connect the ATX connector of the power supply to know whether the output of each power supply is normal or not. It can detect ATX, BTX, ITX, TFX computer power supply, and can display the voltage and PG value of each group in liquid crystal, and quickly detect the performance of computer power supply.
2. LCD Screen: The third generation is LCD liquid crystal display, the output voltage can be seen directly, and the voltage of each group of power supply can be measured 3.3V/+5V/+12V/-12V/SB+5V/PG.
3. Automatically alarm: If there is any defect, the buzzer will automatically alarm, and the corresponding value will flash. You can also measure the output wire P4/P6/P8/SATA/IDE, the external DIE/SATA/P6/P8 is displayed by the light, and there is no liquid crystal display voltage. Only when connected to 24pin or 20pin will there be liquid crystal display voltage.
4. Small and practical power tester: There are more and more power output groups now. As long as there is a problem in one of them, the hardware of the computer system may not work properly, or even burn out related accessories. To measure whether the output voltage of the power supply is stable, a multimeter is usually used. In view of the situation that the power supply market cannot judge the quality of the power supply, the portable computer power supply tester developed by us has an intuitive and accurate LCD display voltage (+/-0.01V), automatic fault alarm, complete test interfaces, small and beautiful appearance, and testing functions. Many other features. It is the most reliable helper to quickly detect PC power.
5. Support interface: Support 20Pin, 24Pin ATX power interface; support SATA power supply; P4 4Pin, 8Pin interface; PCI-E graphics card 6Pin power interface; molex/Xeco power interface; Floppy drive power interface; standard 4Pin power interface, SATA interface; Support ATE hard disk interface.

 

Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Type: Electronic Device Battery Tester
Model Number: Computer Power Supply Tester
Support interface: Support 20Pin, 24Pin ATX power interface; SATA power supply; 4Pin, 8Pin interface of P4; PCI-E graphics card 6Pin power interface; molex/Xeco power interface; Floppy drive power interface; standard 4Pin power interface, SATA interface; ATE Hard disk interface
Power test: +3.3V, -12V, +5VSB, +12V1, +12V2, +5V and PG time value
Material: Aluminum alloy
Features: PG automatic alarm, LCD displays the condition of each volt
Voltage input: 20/40PIN (ATX power supply)
Connection port: Floppy HDD COROM SATA 4pin(P4) 8pin(Dual-CPU) 6pin(PCI-E)
Dimensions: 120x65x18mm/4.72x2.56x0.71in
Weight: 120g
Voltage detection: +12V, -12V, +5V, -5V, +3.3V, 5VSB, 12VPG

Operation method:
A. Insert the power supply 20PIN or 24PIN and P4, P6 or P8 plugs into the corresponding positions of the power tester. (If you plug in the 20PIN or 24PIN interface tester to alarm and display LL, you need to plug in 4P! Please make sure that 4P must be inserted in the 4P position!)
B. Turn on the power supply, and at the same time, there will be two boot sounds of "Di Di". If each group of values does not flash, it means that the power input is normal.
C. If the voltage signal of a certain circuit is not detected (such as 20PIN or 24PIN connector) or the detected voltage is out of the normal range, the buzzer will emit a "di-di" warning sound for a long time, and the corresponding voltage or PG value will be displayed. If the status is flashing, it means that the power supply is faulty power supply!

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.