Good News: New items have arrived Germany warehouse, welcome you to purchase.
We have Germany Warehouse in Germany,so we can ship from Germany to European Union Customers.
1. 2.2KW ER20 Air-cooled spindle motor( 220V,400Hz,24000rpm,4 bearing)
Specification:
Material:Stainless Steel
Size:80x230mm(Middle body diameter:80mm x Length:230mm)
Power:2.2Kw
Voltage:220VAC
Current:8.5A
Frequency:0-400Hz
Speed:0-24000rpm
Cooling:Air-cooled
Runout off:Less than 0.05mm
Precision tapered bore:Less than 0.025mm
Bearing Lubrication:Grease
Collet size:ER20
Bearings:4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Net Weight:5.2kg
Power supply interface:Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface must be safe ground.
Main application:Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
1) Structural features
1) High speed electric main bearing all adopt the C-class high-speed angular contact ball bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2) Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3) Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
II. 2.2kw 3HP Inverter VFD Product Feature 220V
◆Provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation
◆ Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor
◆ With over torque and under torque detection
◆ With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure
◆With jump frequency control function, it can effectively suppress
mechanical resonance and make the system more stable and reliable.
◆ I/O terminals can be freely programmed to combine multiple working modes according to user needs.
◆ Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
◆ 8-stage simple PLC function, multi-speed control and PID control
◆ No PG vector control (SVC): starting torque 0.5Hz up to 150%
◆Two speed control modes: no PG vector control (SVC), V/F control
Input Voltage:220V(+/-15%)
Output Voltage:220VAC
Input Frequency:50-60 Hz
Output Frequency:0-1000 Hz
Input Phase:1 phase
Output Phase:3 phase
Warranty:1 year from the date you purchased
III. 80mm cast aluminium bracket
IV. 1 set ER20 collets (14Pcs)
ER20 Description
Out dia (D1):11.5mm
Height (H):18mm
Hole dia (D2):1-13mm
Run-out tolerance 0.1mm (0.006")
First class 1065 carbon steel
Hardened & precision ground