ZTW 32-Bit Brushless ESC Beatles G2 20A/30A/40A/50A/60A/80A/100A 2-6S SBEC 5V/6V 8A Electronic Speed Controller for RC Airplane Fixed Wing Drone DIY Parts
Features:
1. 32-bit microprocessor which with stronger computing ability and faster running speed.
2. Multiple protections: start-up,over-heat,low-voltage cutoff,signal loss,phase loss and so on.
3. Stronger BEC output up to 5V/6V adjustable,continuous output current 8A,burst current can up to 15A.
4. Super smooth, accurate and programmable throttle linearity and throttle response.
5. Supporting high RPM motors and programmable by LCD card, transmitter.
6. SMR Function: it supports switching the motor rotation to decelerate when the airplane landing to the ground.
Note: The factory default is OFF, the 1Pin signal wire is completely invalid at this time. If you need to turn it on, using Phone App or transmitter to program it “ON”, plug the 3Pin signal wire into the throttle channel, and plug the 1Pin signal wire into any 2-stage switch channel of the receiver, then turn on the transmitter 2-stage switch. The SMR function is turned on now, you can change the forward and reverse directions of the motor by flipping the 2-stage switch of the transmitter.
Warning: This function can only be effective when the throttle is below 50%, and it is only allowed to be used when the airplane is landing on the ground, otherwise it may cause the ESC to burn!
Descriptions:
High performance 32 bit microprocessor, stronger computing ability and faster running speed. Adopting new generation craft on the MOSFET, low heat generation, withstand large current instantly, and high reliability. Super smooth start-up and accurate throttle linearity. Freewheeling make the ESC with higher driving efficiency and more energy-saving.
Specifications:
Model: ZTW Beatles 20A G2 SBEC
Cont/Peak Current: 20A/30A
Battery NiXX/Lipo: 5-12NC/2-4Lipo
BEC Output: 5.0, 6.0V/4A
Size(L*W*H): 60*25*10mm
Weight: 25g
Model: ZTW Beatles 30A G2 SBEC
Cont/Peak Current: 30A/40A
Battery NiXX/Lipo: 5-12NC/2-4Lipo
BEC Output: 5.0, 6.0V/4A
Size(L*W*H): 60*25*10mm
Weight: 25g
Model: ZTW Beatles 40A G2 SBEC
Cont/Peak Current: 40A/55A
Battery NiXX/Lipo: 5-12NC/2-4Lipo
BEC Output: 5.0, 6.0V/4A
Size(L*W*H): 68*25*10mm
Weight: 37g
Model: ZTW Beatles 50A G2 SBEC
Cont/Peak Current: 50A/65A
Battery NiXX/Lipo: 5-12NC/2-4Lipo
BEC Output: 5.0, 6.0V/4A
Size(L*W*H): 68*25*10mm
Weight: 37g
Model: ZTW Beatles 60A G2 SBEC
Cont/Peak Current: 60A/80A
Battery NiXX/Lipo: 5-18NC/2-6Lipo
BEC Output: 5V/6V 8A
Size(L*W*H): 70*34*10mm
Weight: 50g
Model: ZTW Beatles 80A G2 SBEC
Cont/Peak Current: 80A/100A
Battery NiXX/Lipo: 5-18NC/2-6Lipo
BEC Output: 5V/6V 8A
Size(L*W*H): 90*37*10mm
Weight: 75g
Model: ZTW Beatles 100A G2 SBEC
Cont/Peak Current: 100A/120A
Battery NiXX/Lipo: 5-18NC/2-6Lipo
BEC Output: 5V/6V 8A
Size(L*W*H): 90*37*10mm
Weight: 80g
Note: Please do make the throttle calibration for the first time using or changed the TX. Here is the process:
1. Turn on the transmitter, move the throttle stick to the top position.
2. Connect the battery pack to the ESC and wait for about 2 seconds.
3. The motor will beep for twice, then move the throttle stick to the bottom position in 3 seconds.
4. The motor will beep several sounds, sounds time presents the amount of battery cells.
5. When the motor emits "Beep----Beep", means the ESC is ready to work.
Package Included:
1 x Beatles G2 Brushless ESC
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.