Standard package：
- 1 Set Upgraded 3 Axis 3018 Pro CNC Router Engraving Milling Machine Kit
- 3 x Limit switches (XYZ axis)
- 1 x Emergency stop
- 1 x GRBL 1.1f Control Board
- 1 x 775 spindle motor with ER11 Collet 3.175mm
- 1 x 24V DC 5A Power Supply
- 10 x Tip 0.1 mm, 20° φ3.175 mm Drill Bits
- 4 x Plate clamps
- 1 Set Allen Wrench&ER Wrench
- 1 x Brush
- 1 x Spindle motor harness 60cm
- 3 x Stepper motor harness 60cm
- 1 x 4G USB flash drive include the english user manual & GRBL software
- 1 Set Upgraded 3 Axis 3018 Pro CNC Router Engraving Milling Machine Kit
- 3 x Limit switches (XYZ axis)
- 1 x Emergency stop
- 1 x GRBL 1.1f Control Board
- 1 x 775 spindle motor with ER11 Collet 3.175mm
- 1 x 24V DC 5A Power Supply
- 10 x Tip 0.1 mm, 20° φ3.175 mm Drill Bits
- 4 x Plate clamps
- 1 Set Allen Wrench&ER Wrench
- 1 x Brush
- 1 x Spindle motor harness 60cm
- 3 x Stepper motor harness 60cm
- 1 x 4G USB flash drive include the english user manual & GRBL software
Notice:
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.We suggestcnc-based buyers to buy,This machine is not industrial grade level.
Introduction:
Body used profiles and plastic, small size, light weight, USB interface,
GRBL control system, with Emergency stop and limit switch learning,
entry preferred. Can use carving knife, but also can use laser
engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 42x25x27CM
Spindle : 775 spindle motor (12-24V) 10000r/min
Spindle Collet : ER11-3.175mm,Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.25N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 /
Drill bits: tip 0.1mm, 20 degree , diameter 3.175mm.
Laser: 1000mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Machining accuracy: about 0.2mm
Mchining instructions：1) NC：G-code, TAB, NC, NCC files
2) laser: G-code, JPG, DXF file
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Offline hand controller(White type)
2.8 inch Touchscreen Offline controller
Specification:
Display Size: 28 inch (56.9*42.7mm)
Product Size: 95*80*18.5mm
Wifi Function: yes
Suitable for:
3020 Plus
(Pls
note: (Not every engraving machine can use our offline controller, it
is a matter of compatibility. It is recommended that you are not sure
whether it can be used, please consult our customer service before
buying.)
Advantages:
1.
Touchscreen LCD Design: The GRBL Offline Controller with Touchscreen
LCD features an easy to read 2.8” touchscreen display, which is very
easy to operate. The touch screen control design of the offline machine
can make controlling the engraving machine more simple and convenient.
2.
Great Compatibility: The CNC Offline Controller is compatible with
2-axis/3-axis Machine, Like 3018/3020/4540 CNC Router Series. Also For
Laser Engraver
.
3.
Easy & Simple File Access With SD Card: The SD card includes some
files for testing. you can also put the files a s you want into the SD
card. The function inside the touch screen offline machine is the same
as the computer's control software, and you can also control every
movement of the engraving machine as if you were operating on top of the
engraving machine.
4.
Free Your PC: You can successfully and easily operate the engraving
machine without connecting to a computer. Just put the project you need
inside that SD card, and you can operate the engraving machine at any
time.
Optional laser Module
Notice:
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.We suggestcnc-based buyers to buy,This machine is not industrial grade level.
F.A.Q: 1 Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
2 Q: How to assemble the kit?
A:We'll provide whole assemble and operating manual,please share your email address,then we'll send to you.
3 Q: Are there software and instructions can I get it?
A:You can get the software in a USB disk with machine.
4 Q: And what image format the software supports? Engrave Mode?
A: Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
5 Q: Whick type computer system can run its software?
A:The software only support the Windows XP/7/8/10.
6 Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
7 Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber,MDF.
8 Q:What material can it cut?
A:wood, paper, thin leather.
9 Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
10 Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
11 Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool
down(about half of an hour), then start work again. Long time work
continuously with shorten the laser module lifetime.
12 Q:My laser doesn't work, what should I do?
If the machine does not work, it might because:
A The wire connection is wrong.Please check the connection like the picture shown.
B Your computer could not support the software.Please use Win XP 7/8/10 to check it.
C Software problem .Please check whether wires are inserted rightly. And then check your data setting.
D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.
E Laser module/ driver board/power supply is broken.
Please check which part is the main problem, and then send us a video to prove it.
Or
you can send us a video about your software setting, working laser and
driver board. We will analyze it and give you a solution.
Friendly Note:Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed
3W-5.5W laser:
1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.
2. Can't carve metal
7W-10W laser:
1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.
2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.
Introduction:
Body used profiles and plastic, small size, light weight, USB interface,
GRBL control system, with Emergency stop and limit switch learning,
entry preferred. Can use carving knife, but also can use laser
engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Introduction:
Body used profiles and plastic, small size, light weight, USB interface,
GRBL control system, with Emergency stop and limit switch learning,
entry preferred. Can use carving knife, but also can use laser
engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 42x25x27CM
Spindle : 775 spindle motor (12-24V) 10000r/min
Spindle Collet : ER11-3.175mm,Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.25N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 /
Drill bits: tip 0.1mm, 20 degree , diameter 3.175mm.
Laser: 1000mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Machining accuracy: about 0.2mm
Mchining instructions：1) NC：G-code, TAB, NC, NCC files
2) laser: G-code, JPG, DXF file
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Specification:
Suitable for:
3020 Plus
(Pls note: (Not every engraving machine can use our offline controller, it is a matter of compatibility. It is recommended that you are not sure whether it can be used, please consult our customer service before buying.)
Advantages:
1. Touchscreen LCD Design: The GRBL Offline Controller with Touchscreen LCD features an easy to read 2.8” touchscreen display, which is very easy to operate. The touch screen control design of the offline machine can make controlling the engraving machine more simple and convenient.
2. Great Compatibility: The CNC Offline Controller is compatible with 2-axis/3-axis Machine, Like 3018/3020/4540 CNC Router Series. Also For Laser Engraver .
3. Easy & Simple File Access With SD Card: The SD card includes some files for testing. you can also put the files a s you want into the SD card. The function inside the touch screen offline machine is the same as the computer's control software, and you can also control every movement of the engraving machine as if you were operating on top of the engraving machine.
4. Free Your PC: You can successfully and easily operate the engraving machine without connecting to a computer. Just put the project you need inside that SD card, and you can operate the engraving machine at any time.
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.
F.A.Q: 1 Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
2 Q: How to assemble the kit?
A:We'll provide whole assemble and operating manual,please share your email address,then we'll send to you.
3 Q: Are there software and instructions can I get it?
A:You can get the software in a USB disk with machine.
4 Q: And what image format the software supports? Engrave Mode?
A: Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
5 Q: Whick type computer system can run its software?
A:The software only support the Windows XP/7/8/10.
6 Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
7 Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber,MDF.
8 Q:What material can it cut?
A:wood, paper, thin leather.
9 Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
10 Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
11 Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool
down(about half of an hour), then start work again. Long time work
continuously with shorten the laser module lifetime.
12 Q:My laser doesn't work, what should I do?
If the machine does not work, it might because:
A The wire connection is wrong.Please check the connection like the picture shown.
B Your computer could not support the software.Please use Win XP 7/8/10 to check it.
C Software problem .Please check whether wires are inserted rightly. And then check your data setting.
D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.
E Laser module/ driver board/power supply is broken.
Please check which part is the main problem, and then send us a video to prove it.
Or
you can send us a video about your software setting, working laser and
driver board. We will analyze it and give you a solution.
Friendly Note:Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed
3W-5.5W laser:
1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.
2. Can't carve metal
7W-10W laser:
1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.
2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)
1 Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
2 Q: How to assemble the kit?
A:We'll provide whole assemble and operating manual,please share your email address,then we'll send to you.
3 Q: Are there software and instructions can I get it?
A:You can get the software in a USB disk with machine.
4 Q: And what image format the software supports? Engrave Mode?
A: Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
5 Q: Whick type computer system can run its software?
A:The software only support the Windows XP/7/8/10.
6 Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
7 Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber,MDF.
8 Q:What material can it cut?
A:wood, paper, thin leather.
9 Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
10 Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
11 Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool
down(about half of an hour), then start work again. Long time work
continuously with shorten the laser module lifetime.
12 Q:My laser doesn't work, what should I do?
If the machine does not work, it might because:
A The wire connection is wrong.Please check the connection like the picture shown.
B Your computer could not support the software.Please use Win XP 7/8/10 to check it.
C Software problem .Please check whether wires are inserted rightly. And then check your data setting.
D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.
E Laser module/ driver board/power supply is broken.
Please check which part is the main problem, and then send us a video to prove it.
Or
you can send us a video about your software setting, working laser and
driver board. We will analyze it and give you a solution.
Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed
3W-5.5W laser:
1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.
2. Can't carve metal
7W-10W laser:
1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.
2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)
