100mm-1000mm Marine Boat Fuel Sending Unit Tank Level Sender Sensor 0-190ohms
100-1000mm Fuel Level Sender Tank Level Sending Unit Gauge 0-190 ohms For Car Marine Boat

 

Gauge Connection:

  • Black: Ground(-)
  • Red: 9-30VDC(+)
  • Blue: Signal Input Connect the signal of the fuel sender
  • Yellow: Backlight(+)
  • White: Adjust (Adjust the backlight) You can touch the negative, the backlight will change


Sender connection:

  • Brown: Signal output
    Blue: Negative(-)
 
NOTES: This is a optional listing, please confirm the selected item before placing the order.
 

Description:
  • Suitable for truck, generators/gen set, bus and marine field.
  • Widely used in fuel, waste water.
  • Reed switch, steady output signal.
  • Simple and stronge structure , Advanced corrosion resistance.
  • Long using life, anti-vibration,anti-explosion.
  • High quality fuel level senser.
  • Economical level sensing solution, long service lifespan.
Fuel Level Gauge Specification:
  • Size: dia 52mm
  • Backlight: Red
  • Indicating Range:E- F
  • Working voltage: 9-32V
  • Waterproof rating: IP67
  • Material: Stainless steel
  • Signal: 0-190 ohms
  • Working Temperature: -30~+75℃
  • Storage Temperature: -40~+85℃
  • Color: Black&Silver
Package:
  • 1 x 52mm Fuel Level Gauge
  • 1 x Fuel Level Sending Units
  • 1 x Instruction manual
  • 1 x Wiring harness
Sensor Specification:
  • Please attention we have 6 models Level Sensor Length Range for choice:
  • 100mm,150mm, 175mm, 200mm,225mm,200mm, 250mm,275mm,300mm,350mm
  • Material: 316 Stainless Steel
  • Protection Rank: IP67
  • Resistance output signal: 0-190ohm(Standard European)
  • Operational Temperature: -40°F ~ +185°F (-40℃ ~ +85℃)
  • Screw size: M5*16
  • Level Sensor Support Water Level Gauge and Fuel Level Gauge
INSTRUCTIONS
  • Blue - Ground
  • Brown- connect to instrument signal line
  • The sensor can not be connected to the power supply, can not be connected to the positive electrode, does not need to be connected to the power supply, it is connected with the gauge signal directly
  • Empty oil level 0 ohm
  • Full oil level 190 ohm
Note:
  • We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
  • Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
PushAuction