*Please wear the protective glass when you use the laser module.

*Do not touching the laser light directly in case that hurt the body and skin.

*Keep children and pets away from the laser module when it working.

*The Laser dot could not be adjusted, please make sure the distance between bottom of the laser module and engraving  material is right(Use the plastic column to do it). Or it will influence the result.

*Please connect to the driver board carefully! The Red cord is 12V+, the black cord is GND-,the yellow cord is

Signal(S). Please make sure you know how to connect it,Otherwise it might damage the laser module!

 

Product Specification:

● Working area :100*100CM

● Power Input：AC100-240V

● System Support;Win XP/7/8/10

● Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving

● Supported Formats:jpg, bmp, svg, G-code

● Material:Stainless Steel and Acrylic

● Working Voltage:DC 12V

● Control Software System :LaserGRBL/Benbox/Lightburn（Provided free software）

● Engraving Accuracy:0.01mm

● Engraving Area:100x100cm / 39.37 x 39.37inch (maximum)

● Can Engrave:Metal(201 stainless steel ,304 stainless steel ,Titanium steel and anodized aluminum),Wood, Plastic, PCB, Paper, Bamboo, Ox Horn, Leather,Sponge Paper, etc.

● Can Cut:10mm Plywood, 10mm Corkwood, 3mm MDF board, 5mm Black acrylic board, leather, paper,ect.

● The engraving/cutting effect is affected by many factors, including engraving material reflectivity, hardness, density, color, laser speed, power, etc. If you have specific engraving needs, please contact customer service

Buyers reading:

This machine is a full set of parts, required installed on their own, giving the purchaser to install software and tutorials(there is a USB flash drive in the package, or provide an email to send the electronic version).

Document format: NC、DXF、BMP、JPG、PNG、GCODE
Operating software: Laser GRBL, LightBurn, with Win XP/Win7/Win 8/Win10/Win11 and Mac system(LightBurn)

● Laser Type: semiconductor blue light

● Shell Material: aviation aluminum

● Module center material: copper

● 40W actual output power：6-7W（Label shows standard output power）

● 80W actual output power：10-11W（Label shows standard output power）

● Laser Size: 40mm

● Laser Wavelength: 450nm

● Drive mode: External ACC constant current drive

● Power Supply Voltage: 12V

● Power Control: PWM/TTL ( voltage 0-5V)

● Cable: 3 pin, Red "+" Black "-" Yellow "PWM"

● Beam Shape: Dot-shaped fixed focus

● The life span is 20000 hours.(Due to the different engraving materials, the smoke produced by engraving will adhere to the lens. To avoid affecting the engraving effect, it is recommended to use a fan)