4pcs 433mhz DC3.6-24V 1CH Relay RF Remote Control Switch Receiver Module
1. Application range: LED lights, LED light strings, Christmas tree light strings, light control switches, can be used for Internet celebrity bubble machines, etc.
2. Three output working modes: jog/self-locking/interlocking
3. Long-distance working voltage
4. Ultra-low power consumption, highly sensitive response
5. Using high-quality materials, the quality is guaranteed
Working voltage: DC3.6V~24V
Maximum load: 2A (maximum load power 48W)
Quiescent current: 3.6mA~5.5mA(6.08mA)
Operating frequency: 433MHz
Receiving sensitivity: ≥-107dBm
Output voltage: input DC3.6V~DC24V, output DC3.6V~DC24V
Modulation Mode: ASK (Super Heterodyne)
Supported encoding format: 1527 learning code
The number of remote controllers stored: ≤10
Working mode: jog, self-locking, interlocking
Working temperature: -20~80°C
Input voltage = input voltage (control negative electrode through MOS tube)
Learning method: button learning (click to jog, click twice to self-lock, press three times to interlock)
Working mode: jog, self-locking, interlocking
Taking the function mode as the storage unit, a module can only store up to 5 (pairs) functions, such as:
The module can remember 5 "jog keys", or remember 5 pairs of "interlock keys", or remember 5 "self-lock keys", or it can be a mixture of 5 functions, such as remember two jog keys key, two self-locking keys, a pair of interlocking keys
Remote control distance: about 30 meters in open environment, can be used by partition
The button time is required to be more than 0.8 seconds. If you press too fast, you will not receive the signal.
Pay attention to the wiring method and see it clearly to avoid short circuit
Black (- negative pole) red (+ positive pole) [power input terminal]
White (- negative pole) yellow (+ positive pole) [load output terminal]
1. Output working mode (3 types: jog/self-locking/interlocking/)
A. Jog: (press and hold the remote control to open, let go to close)
B. Self-locking: (press the remote control to turn on, press the remote control again to turn off)
C. Interlock: (press the first key of the remote control to open, press the second key of the remote control to close)
2. How to use
1. Set to jog: press the learning pairing key once (about 2 seconds), then the red light is on within 8 seconds to pair the remote control
2. Set as self-locking: press the learning pairing button 2 times (about 2 seconds), then the red light is on within 8 seconds to pair the remote control
3. Set as interlock: press the learning pairing key 3 times (about 2 seconds), then the red light is on within 8 seconds, and the remote control can be paired
4. Code clearing function: press the learning button to match the code 8 times, the LED indicator flashes 6 times, and the code clearing is completed
(Note: When switching the working mode, please plug in the power supply to clear the code and check the code after the power is turned off)
4 x module
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
1. Application range: LED lights, LED light strings, Christmas tree light strings, light control switches, can be used for Internet celebrity bubble machines, etc.
2. Three output working modes: jog/self-locking/interlocking
3. Long-distance working voltage
4. Ultra-low power consumption, highly sensitive response
5. Using high-quality materials, the quality is guaranteed
Working voltage: DC3.6V~24V
Maximum load: 2A (maximum load power 48W)
Quiescent current: 3.6mA~5.5mA(6.08mA)
Operating frequency: 433MHz
Receiving sensitivity: ≥-107dBm
Output voltage: input DC3.6V~DC24V, output DC3.6V~DC24V
Modulation Mode: ASK (Super Heterodyne)
Supported encoding format: 1527 learning code
The number of remote controllers stored: ≤10
Working mode: jog, self-locking, interlocking
Working temperature: -20~80°C
Input voltage = input voltage (control negative electrode through MOS tube)
Learning method: button learning (click to jog, click twice to self-lock, press three times to interlock)
Working mode: jog, self-locking, interlocking
Taking the function mode as the storage unit, a module can only store up to 5 (pairs) functions, such as:
The module can remember 5 "jog keys", or remember 5 pairs of "interlock keys", or remember 5 "self-lock keys", or it can be a mixture of 5 functions, such as remember two jog keys key, two self-locking keys, a pair of interlocking keys
Remote control distance: about 30 meters in open environment, can be used by partition
The button time is required to be more than 0.8 seconds. If you press too fast, you will not receive the signal.
Pay attention to the wiring method and see it clearly to avoid short circuit
Black (- negative pole) red (+ positive pole) [power input terminal]
White (- negative pole) yellow (+ positive pole) [load output terminal]
1. Output working mode (3 types: jog/self-locking/interlocking/)
A. Jog: (press and hold the remote control to open, let go to close)
B. Self-locking: (press the remote control to turn on, press the remote control again to turn off)
C. Interlock: (press the first key of the remote control to open, press the second key of the remote control to close)
2. How to use
1. Set to jog: press the learning pairing key once (about 2 seconds), then the red light is on within 8 seconds to pair the remote control
2. Set as self-locking: press the learning pairing button 2 times (about 2 seconds), then the red light is on within 8 seconds to pair the remote control
3. Set as interlock: press the learning pairing key 3 times (about 2 seconds), then the red light is on within 8 seconds, and the remote control can be paired
4. Code clearing function: press the learning button to match the code 8 times, the LED indicator flashes 6 times, and the code clearing is completed
(Note: When switching the working mode, please plug in the power supply to clear the code and check the code after the power is turned off)
4 x module
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 11.01.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: