|
|
|
|
|
|
|
|
|
|
|
|
|
|
Item Description:
This Listing is for 4 Supports which fit the Following Applications:
For Dodge Dakota 2005-2010
For Mitsubishi Raider 2006-2009
For Ram Dakota 2011
How to Properly Install a standard Lift support?
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
6. If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.
Important Notes about Lift Supports:
1. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification,please ensure you replace all the supports in the compartment at the same time to ensure proper performance.
2. Lift supports loose pressure over time,even sitting on shelves in most auto parts stores and many of the inventory liquidators on . Our business is lift supports,and we make sure to sell newly produced units,keeping our inventory fresh and rotated.
For BMW 3 Series GT F34 2013-2020
Item Specifics | |
---|---|
Brand | autodealsparts |
Manufacturer Part Number | AUT84396001S |
Manufacturer Warranty | 1 Year |
Placement on Vehicle | Left,Right |
Finish | Smooth |
Product Type | Gas Spring Lift Support |
Return Policy | 30 Days Free Return |
Fitment Type | Direct Replacement |
OE Spec or Performance/Custom | OE Spec |
Greasable or Sealed | Sealed |
Kit or Single Part | Kit |
Modified Item | NO |
Mounting Hardware Included | No |
Material | Steel |
We only accept PayPal.
1. We only ship to confirmed paypal addresses, your paypal address must match your shipping address.
2. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply.
4. Local pick up is not available.
All of our brand new items come with a 30-days money-back guarantee.
If you have any question, please contact us.
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Autodealsparts
Shop Category Picture Picture Picture |
4Pcs Hood + Trunk Lift Support For Dodge Dakota 2005-2010 Ram Dakota 2011 Struts
Item Description:
This Listing is for 4 Supports which fit the Following Applications:
For Dodge Dakota 2005-2010 For Mitsubishi Raider 2006-2009 For Ram Dakota 2011
How to Properly Install a standard Lift support?
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
6. If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.
Important Notes about Lift Supports:
1. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification,please ensure you replace all the supports in the compartment at the same time to ensure proper performance.
2. Lift supports loose pressure over time,even sitting on shelves in most auto parts stores and many of the inventory liquidators on . Our business is lift supports,and we make sure to sell newly produced units,keeping our inventory fresh and rotated.
For BMW 3 Series GT F34 2013-2020
Payment
We only accept PayPal. Shipping
1. We only ship to confirmed paypal addresses, your paypal address must match your shipping address.
Returns
All of our brand new items come with a 30-days money-back guarantee. Contact Us
If you have any question, please contact us. Warning
Cancer and Reproductive Harm - www.P65Warnings.ca.gov. All rights reserved. |