• 1. Stepper Motor

  
  
  

  
  

  

  
  
  

  Model Number: 23HS2430B(Dualshaft;Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length)

  Motor Type: Hybrid Stepper

  Step Angle: 1.8 deg.

  Holding Torque: 280Ncm (425oz.in)

  Phase Resistance: 1.6ohms

  Rated Current/phase: 3A

  Inductance: 6.8mH+/-20%(1KHz)

  

  
  

  General Specification:

  Step angle accuracy:+ -  5%(full step,not load)

  Resistance accuracy: + - 10%

  Inductance accuracy:+ - 20%

  Temperature rise: 80deg Max(rated current,2 phase on)

  Ambient temperature ----------?20deg  ----  +50deg

  Insulation resistance:100ohm  Min,500VDC

  Insultion Strength--------500VAC for one minute

  
  

  

  

  Advantages

  · Our motor is made of solid and durable metal. The perfect combination of rubber and rotor makes the internal structure more stable, and also reduces the vibration and noise when the engine runs.

  · The motor runs more quietly, with a high torque of 425oz in. The coil uses pure copper enamelled wire to ensure that long-term operation will not lead to excessive engine temperature.

  · The rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface, more stable magnetic field and longer service life of motor.
  

  
  

  Wiring:

  
  

  A+  Red      Stepper motor's red wire connect to driver's A+ port    

  A- Green    Stepper motor's green wire connect to driver's A- port

  B+ YellowStepper motor's yellow wire connect to driver's B+ port

  B-  BlueStepper motor's blue wire connect to driver's B- port

  
  
  
  

  2. CW5045 high microstep stepper motor driver

  DC power input type:24V~50VDC
  Output current:1.3,1.8,2.3,2.7,3.2,3.7,4.2,4.5A
  Mircostepping:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64,1/128,1/256;1/5,1/10,1/25,1/50,1/125,1/250
  Protect form : Overheated protect, lock automatic half current ,error connect protect
  Working environment:Temperature-15-40deg Humidity<90%
  It is fit for NEMA17-23 two and four phase stepper motors whose current is
  small than 4.5A,it also can fit for small length NEMA34 two and four
  phase stepper motors.
  
  
  3. Mach3 USB Motion Card STB4100 V2.1
  

  

  Features:
  1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
  2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
  3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop
  switch, auto tool zero, home switch etc.
  4. Support for connecting electronic handwheel;
  5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
  6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling
  the spindle starts, forward rotating and reverse rotating, pumps or other device;
  7. 1 status LED, indicate connection status on the board
  
  

  

  Mach3 USB Motion Card STB4100 V2.1
  1.2.Software license application:
  Copy license files “Mach1Lic.dat” from “mach3 software folder”,to C:\Mach3 Cover the
  original file,Reset Computer（must reset the computr,please don't open the software dircetly!）
  Way above the license for DIY or study purposes only, not for commercial use.
  1.3. Installation the software of the USB motion card:
  This USB motion card does not need install any USB driver,Windows2000/XP/Windows7,can
  directly identify.
  1.3.1 Connecting the USB cable to the PC and the motion card:
  The first installation of motion control card, take about 10s, when the green led lights on motion
  control card, indicating that the connection is successful, return the following tips when you
  install on your computer
  
  

  Feature:

  1. The output current is steplessly adjustable to meet your various application requirements.

  2. Automatic half-flow function. It is also equipped with an automatic half-flow switch, which is easy to use.

  3. Use 6N137 high-speed optical lotus to ensure high speed without losing step.

  4. The subdivision setting instructions are printed on the back of the board.

  5. Adopt enlarged radiator, good heat dissipation.

  6. With output short-circuit protection function, worry-free use.

  7. Adopting the common anode input mode, there are two input terminals, the wiring is more convenient.

  Parameters:

  1. The working voltage is DC 10V-45V. It is recommended to use switching power supply DC32V for power supply.

  2. Adopt 6N137 high-speed optical lotus root to ensure high speed without losing step.

  3. Using Toshiba's new high-current, high-voltage TB6600HG brand new original chip, with low-voltage shutdown, overheating shutdown and over-current protection circuits, and short-circuit protection added compared to TB6560.

  4. The rated maximum output reaches: ±4.5A.

  5. Suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A.

  6. Automatic half-flow function.

  7. Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.

  
  
  4.Switching power supply

  
  

  400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:48v/8.3A,single output switching power supply

  
  

  5. Usage or Application

  
  
  This products are widely used in engraving machine, printer, medical equipment,
  embroidery machine, stage lighting, textile automation, printing,
  packaging and other industries automation equipment.