Applicable to Xiaomi Black Shark 4Pro screen assembly, display screen, touch screen, LCD
Style: millet black shark 4pro display screen - TFT
Size: 15.8 * 7.3cm/6.22 * 2.87inch
Precautions before installation
1. Prompt 1: Test before installation
Do not remove any protective film or labels when testing. Please pay attention to static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD strap. This will prevent static electricity from damaging the electronic components in the phone.
Be sure to wear goggles and be careful not to cut your fingers with glass fragments.
2. Prompt 2: Simulation test
Replacing the filter screen is a very fragile product. We strongly recommend testing before installation. Please simulate the test, which means that the phone is separated, (motherboard+LCD or screen) connect the audio cable and replace it with a new one, power on, and the test is completed. If the test is normal, please install it. If it cannot be displayed, please contact us at the first time.
3. Prompt 3: Do not bend the cable excessively
Make sure that the LCD cable is not excessively bent. Bending more than 90 degrees will result in a black display.
packing:
1 * Millet black shark 4pro display
The dimensions are measured manually, and there may be slight deviation.
Due to different display and lighting effects, the actual color of the product may be slightly different from the color shown in the picture.