AC100A LCD Voltmeter/Ammeter
Features:
A Function
1. Electrical parameter measurement function (voltage, current, active power, energy)
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. Reset energy function.
5. Store data when power off.
6. STN whole viewing angleLCD (display voltage, current, active power/energy at the same time)
7. Backlight function.
B. Appearance and Key function
I. Display Interface
The large-screen STN whole viewing angle LCD can display voltage, current, power, energy at the same time.(note: power and energy display can be switched by the key.)
II.Display format
1.Power: test range: 0~22kW
within 1KW, the display format is 0.0~999.9W;
1KW and above, the display format is 1000~9999W;
10kw and above, the display format is 10.0~22.0kW
2.Energy: test range: 0~9999kWh
Within 10KWh, the display format is 0~9999Wh;
10kWh and above, the display format is 10~9999kWh;
Over 9999kwh will return 0
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A
Display format: 0.00~99.99A
III. Key
1. Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key at least3 seconds until the number in energy display area flash, then release the key.
Step2: If short press the key again, then the energy value is cleared and exit the reset state.If short press the key again, then the energy value will not be cleared and will exit the reset state. If there is no operation on the key within 10 seconds, the energy value will not be cleared and will exit the reset state.
3. Set power alarm threshold
Step1: Long press the key at least 3 seconds until the number in power display area flash,then release the key
Step2: Powerarea display the current power alarm value and the last digit begin to flash, then you can short press the key to plus 1, short press the key can switch the digit which you want to set. The threshold can’t be over 25kw( note: the default value is 25kw)
Step3: After finish the setting, long press the key over 3 seconds or there is no operation over 10 seconds, it will store data automatically and exit the set state.
4. Power/Energy switch
You can short press the key to switch display the power/ energy, the display state will be store when power off.
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power: 22kW
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade
Electrical parameter measurement function (voltage, current, active power, Energy)
Overload alarm function (over power alarm threshold, backlight and power flashing to alarm)
The reset function of Energy key
Store data when Power-off
Large-screen LCD display (display voltage, current, active power, Energy at the same time)
Backlight function.
Overload alarm function (over power alarm threshold, backlight and power flashing to alarm)
The reset function of Energy key
Store data when Power-off
Large-screen LCD display (display voltage, current, active power, Energy at the same time)
Backlight function.
Specifications:
Display format:
1.Power: test range: 0-22kW
Within 1kW, the display format is 0.0-999.9W;
Within 1kW-10kW, the display format is1000-9999W;
10kW and above, the display format is 0.1-22.0kW
2.Energy: test range: 0-9999kWh
Within 10kWh, the display format is 0-9999Wh
10kW and above, the display format is 10-9999kWh
3.Voltage: test range: 80-260V
Display format: 80-260V
4.Current: test range: 0-100A
Display format: 0.00-99.99A
Color: Black
Display format:
1.Power: test range: 0-22kW
Within 1kW, the display format is 0.0-999.9W;
Within 1kW-10kW, the display format is1000-9999W;
10kW and above, the display format is 0.1-22.0kW
2.Energy: test range: 0-9999kWh
Within 10kWh, the display format is 0-9999Wh
10kW and above, the display format is 10-9999kWh
3.Voltage: test range: 80-260V
Display format: 80-260V
4.Current: test range: 0-100A
Display format: 0.00-99.99A
Color: Black
Package Included:
1 X Digital LCD AC Voltmeter / Ammeter
1 X Current Transformer
1 X Digital LCD AC Voltmeter / Ammeter
1 X Current Transformer
AC20A LCD Panel Power Meter
Specifications:
Brand new & high quality!
Dual measurement of AC voltage, AC current(It can't be used for measuring the AC power converted from a DC power with an inverter)
Voltage Measuring Range: AC 80 ~ 260V
Current Measuring Range: AC 0 ~ 20A
Active Power Measuring Range: 0 ~ 4.5kW
The meter can only measure the active power(real power). It doesn't show Apparent power which includes reactive power and active power. For more information about the difference, please read this: LINK
Energy Measuring Range: 0 ~ 9999kWh
Operating Temperature: -10 ºC ~65 ºC
Operating Humidity: 35~85% RH
Dimensions:9cm * 5cm * 2.45cm/3.54" * 1.97" * 0.96"
Dual measurement of AC voltage, AC current(It can't be used for measuring the AC power converted from a DC power with an inverter)
Voltage Measuring Range: AC 80 ~ 260V
Current Measuring Range: AC 0 ~ 20A
Active Power Measuring Range: 0 ~ 4.5kW
The meter can only measure the active power(real power). It doesn't show Apparent power which includes reactive power and active power. For more information about the difference, please read this: LINK
Energy Measuring Range: 0 ~ 9999kWh
Operating Temperature: -10 ºC ~65 ºC
Operating Humidity: 35~85% RH
Dimensions:9cm * 5cm * 2.45cm/3.54" * 1.97" * 0.96"
Package Include:1 * LCD Panel AC Power Meter
AC100A LCD Volt Watt Power Meter
A Function
1. Electrical parameter measurement function (voltage, current, active power, energy)
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. Reset energy function.
5. Store data when power off.
6. STN whole viewing angleLCD (display voltage, current, active power/energy at the same time)
7. Backlight function.
B. Appearance and Key function
I. Display Interface
The large-screen STN whole viewing angle LCD can display voltage, current, power, energy at the same time.(note: power and energy display can be switched by the key.)
II.Display format
1.Power: test range: 0~22kW
within 1KW, the display format is 0.0~999.9W;
1KW and above, the display format is 1000~9999W;
10kw and above, the display format is 10.0~22.0kW
2.Energy: test range: 0~9999kWh
Within 10KWh, the display format is 0~9999Wh;
10kWh and above, the display format is 10~9999kWh;
Over 9999kwh will return 0
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A
Display format: 0.00~99.99A
III. Key
1. Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key at least3 seconds until the number in energy display area flash, then release the key.
Step2: If short press the key again, then the energy value is cleared and exit the reset state.If short press the key again, then the energy value will not be cleared and will exit the reset state. If there is no operation on the key within 10 seconds, the energy value will not be cleared and will exit the reset state.
3. Set power alarm threshold
Step1: Long press the key at least 3 seconds until the number in power display area flash,then release the key
Step2: Powerarea display the current power alarm value and the last digit begin to flash, then you can short press the key to plus 1, short press the key can switch the digit which you want to set. The threshold can’t be over 25kw( note: the default value is 25kw)
Step3: After finish the setting, long press the key over 3 seconds or there is no operation over 10 seconds, it will store data automatically and exit the set state.
4. Power/Energy switch
You can short press the key to switch display the power/ energy, the display state will be store when power off.
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power: 22kW
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade
Package included:1 * Volt Watt Power Meter Ammeter Voltmeter
AC100A Voltage&Amp Meter
Features
100% brand new and high quality
Dual measurement of AC voltage, AC current with AC current transformer (It can't be used for measuring the AC power converted from a DC power with an inverter)
Voltage Measuring Range: AC 80 ~ 260V
Current Measuring Range: AC 0 ~ 100A
Power Measuring Range: 0 ~ 22kw
Energy Measuring Range:0 ~ 9999kwh
Operating Temperature: -10 ºC ~65 ºC
Operating Humidity: 35~85% RH
Size (L*W*H):11.8 x 6 x 2.7cm/4.65"x2.36"x1.06"(approx)
Note:
Please allow 0-2mm error due to manual measurement, thanks for understanding.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!
Package includes:1 X AC Voltage & Amp Meter with AC current transformer
100% brand new and high quality
Dual measurement of AC voltage, AC current with AC current transformer (It can't be used for measuring the AC power converted from a DC power with an inverter)
Voltage Measuring Range: AC 80 ~ 260V
Current Measuring Range: AC 0 ~ 100A
Power Measuring Range: 0 ~ 22kw
Energy Measuring Range:0 ~ 9999kwh
Operating Temperature: -10 ºC ~65 ºC
Operating Humidity: 35~85% RH
Size (L*W*H):11.8 x 6 x 2.7cm/4.65"x2.36"x1.06"(approx)
Note:
Please allow 0-2mm error due to manual measurement, thanks for understanding.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!
Package includes:1 X AC Voltage & Amp Meter with AC current transformer
AC Voltage Power Detector
Features:
Electric Socket Wall AC Power Outlet Voltage Detector Sensor Tester Pen 90-1000V
The next generation AC non-contact voltage testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there is voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Frequency Range: 50 to 500 Hz
Test Voltage Range: 90-1000V AC
Safety Rating : CAT II 1000v
Powered By: 2 x AAA Batteries (Not included)
A perfect tool kit for home and electric industry uses
Ideal design for testing power cables, circuit breakers, wall sockets, junction boxes, fuses, etc
Just press the button, white LED light can be always on when there is absence of voltage
"Beep" sound and red flashing LED would indicate the presence of voltage
Totally insulated, no exposed metal or conductive parts
Long life and low power consumption
Compact, safety, & easy to carry
The next generation AC non-contact voltage testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there is voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Frequency Range: 50 to 500 Hz
Test Voltage Range: 90-1000V AC
Safety Rating : CAT II 1000v
Powered By: 2 x AAA Batteries (Not included)
A perfect tool kit for home and electric industry uses
Ideal design for testing power cables, circuit breakers, wall sockets, junction boxes, fuses, etc
Just press the button, white LED light can be always on when there is absence of voltage
"Beep" sound and red flashing LED would indicate the presence of voltage
Totally insulated, no exposed metal or conductive parts
Long life and low power consumption
Compact, safety, & easy to carry
Specifications:
Material: ABS Plastic
Color: Yellow & Grey
Item size: 152*23*15mm
Package size: 204*91*19mm
Color: Yellow & Grey
Item size: 152*23*15mm
Package size: 204*91*19mm
Packing content:1 x LED Light Voltage Alert Pen