We only accept payment through PayPal.
Any question, please contact us by email on working days.
If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
|
|
|
|
|
Item Description:
Item Features:
OE Part Number:
Package Include:
Vehicle Compatibility:
How to Replace a Headlight Switch
STEP 1
Disconnect the negative cable from your battery and wait 5 to 10 minutes to allow the capacitors for the airbags to discharge.
STEP 2
Remove any screws around the switch, or pry the retaining ring that holds the switch in place away from the dash.
STEP 3
Slide the switch out of the dash carefully, and remove the wire plugs. Attach a spring clamp onto the plugs to keep them from falling into the dash where they are difficult to fish back out.
STEP 4
Pull the light switch into the on position, press the headlight case button and remove the switch. Using a screwdriver helps if your case has more than one release button. You may have to remove a nut at the bottom of the switch shaft to remove the decorative bezel.
STEP 5
Insert the new car headlight switch into the housing and replace the bezel and shaft nut if necessary.
STEP 6
Attach the wire plugs, taking care not to bend any contacts. Slide the housing and switch back into the dash without binding the connecting wires.
STEP 7
Put back any trim and mounting screws before reconnecting the negative battery wire. Test the switch and the low and high beams.
Notice:
1.Prior to buying,
Please check your vehicles compatibility on the chart above .
If your car does not appear on the compatibility chart,
it is not compatible with your vehicle.
2.Prior to buying,
Please check your old number and pictures.
If your old product pictures is not same with the item picture,
it doesn't fit your vehicle.
1 Year Warranty
This item have 1-year warranty.
In the event the item should fail due to
manufacturing defects during intended use,
we will replace the part by free.
We only warranty cost of item parts.
Any installation or other fees are non-refundable.
Item Specifics | |
---|---|
Brand | LMS |
Features | Durable |
Manufacturer Part Number | land15160301S |
To Control | Headlamp |
OE/OEM Part Number | 7C3Z11654CA, 8C3Z11654CA |
Color | Shown as picture |
Interchange Part Number | 7C3Z11654CA,8C3Z11654CA |
Superseded Part Number | 7C3Z11654CA,8C3Z11654CA |
Universal Fitment | No |
Performance Part | No |
Manufacturer Warranty | 1 Year |
Condition | New |
Fitment Type | Direct Replacement |
Mounting Hardware Included | No |
Package Quantity | 1 |
Package Type | Box |
Package Contents | 1 Headlamp Switch |
Material | Plastic |
Modified Item | No |
Attachment Method | Direct, Snap Fit |
Connector Gender | Connector Gender |
Connector Shape | Rectangular |
Functions | Functions |
Number of Switch Positions | 5 |
Terminal Gender | Male |
Terminal Quantity | 10 |
Terminal Type | Pin |
Voltage | 12 |
Knob Color | Black |
Knob Included | Yes |
Knob Material | Plastic |
We only accept payment through PayPal.
Any question, please contact us by email on working days.
If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
Terms & Contact Payment Policy Shipping Policy Return Policy FAQ About Us |
Headlight Fog Lamp Switch Fits 2007-10 Ford Edge 08-10 F-250 F-350 F-450 F-550
Item Description:
Item Features:
OE Part Number:
Package Include:
Vehicle Compatibility:
How to Replace a Headlight Switch
STEP 1 Disconnect the negative cable from your battery and wait 5 to 10 minutes to allow the capacitors for the airbags to discharge.
STEP 2 Remove any screws around the switch, or pry the retaining ring that holds the switch in place away from the dash.
STEP 3 Slide the switch out of the dash carefully, and remove the wire plugs. Attach a spring clamp onto the plugs to keep them from falling into the dash where they are difficult to fish back out.
STEP 4 Pull the light switch into the on position, press the headlight case button and remove the switch. Using a screwdriver helps if your case has more than one release button. You may have to remove a nut at the bottom of the switch shaft to remove the decorative bezel.
STEP 5 Insert the new car headlight switch into the housing and replace the bezel and shaft nut if necessary.
STEP 6 Attach the wire plugs, taking care not to bend any contacts. Slide the housing and switch back into the dash without binding the connecting wires.
STEP 7 Put back any trim and mounting screws before reconnecting the negative battery wire. Test the switch and the low and high beams.
Notice:
1.Prior to buying,
Please check your vehicles compatibility on the chart above .
If your car does not appear on the compatibility chart,
it is not compatible with your vehicle.
2.Prior to buying,
Please check your old number and pictures.
If your old product pictures is not same with the item picture,
it doesn't fit your vehicle.
1 Year Warranty
This item have 1-year warranty.
manufacturing defects during intended use,
we will replace the part by free.
Any installation or other fees are non-refundable.
We only accept payment through PayPal. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Local pick up is not available.
All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by email on working days. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR. All rights reserved. |