With Oil Service Reset SAS & Battery Test.

The Update version of iCarsoft i920

iCarsoft FD V1.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 2.8” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

Based on i920, more functions are added to FD V1.0:

SAS Reset

Oil service reset

Battery Voltage Test

Data Print

Notice:

iCarsoft FD V1.0 scanners just work on Ford/ Holden with OBD II protocol,

if your vehicle were produced before year2005 or after year 2016, please kindly confirm with us 

about the compatibility before purchasing !

Not all functions are supported on all years/models, because certain functions may be limited from the specific vehicle condition.

If you want to test any certain functions, please kindly confirm with us.

Product Features:

1. iCarsoft FD V1.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2. Applies to the single Brand of most models of Ford/Holden which equipped with OBDII-16 DLC
3. Support OBDII/EOBD Ten Modes of Operation
4. Full System Diagnosis
5. Read &Clear DTC2.8″TFT LCD, 320*240 Pixels
6. Read Live Data
7. Support Oil Service Reset, SAS Reset
8. Support Data Review
9. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
10. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
11. DTC Library to look up when user is operating this tool.
12. Easy To Use With Silicone Keys
13. Full Speed Upgrade Via USB2.0
14. 8″TFT LCD, 320*240 Pixels
15. Multi-language: English, German, Dutch, Spanish, French.
16. Available in Red, Black, Orange and Blue

Special functions:

*** Varies across year and model ***

Oil Service Reset Function:

The FD V1.0 allow you to reset Oil Service in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step

SAS Reset Function (Not supprted on Holden)

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft FD V1.0 will allow you to carry out steering angle re-calibration on supported models.

Specifications:

Display: 2.8″TFT LCD, 320*240 Pixels

Operation Temperature: 0°C ~ 50°C

Storage Temperature: -20°C ~ 70°C

Operating Voltage: 9 ~ 18V

Operating Current: 150mA@12V(Typical)

Power Consumption: 1.8W(Typical)

Dimension: 187.5*101*32 mm (L x W x H)

Contents:

FD V1.0 Main Unit

User Manual

Main Cable

USB Cable

TF Card (Within the scanner)

Nylon carry case

PROFESSIONAL MULTI-SYSTEM AUTO DIAGNOSTIC TOOL FD V1.0FOR FORD (US FORD, EU FORD AND AU FORD)/HOLDEN + OBDII + OIL RESET+SAS

① LCD DISPLAY--Indicates test results.
② BACK BUTTON--Returns to previous menu.
③ UP BUTTON--Moves cursor up for selection.
④ DOWN BUTTON--Moves cursor down for seiection.
⑤ LEFT BUTTON--Moves cursor up for selection.
⑥ RIGHT BUTTON--Moves cursor down for selection.

⑦ ENTER BUTTON--Confirms a selection(or action)from a menu list.
⑧ FUNCTION BUTTON--In case of special use.
⑨ FUNCTION BUTTON--In case of special use.
⑩ FUNCTION BUTTON--In case of special use.
⑪ HHELP BUTTON--Shows help information for test results or user operation.

PRODUCT FEATURES

1. iCarsoft FD V1.0 can do it all-reads and clears trouble codes on most of the systems

such as engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of all Models equipped with OBDII-16 DLC
6. Easy To Use with Silicone Keys
7. Oil Light/Service Reset: Support service lamp reset.
8. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to
straight ahead, or recalibrates SAS while steering part replacement.
9. The Print Data function allows you printing out diagnostic data recorded by the scan

tool or customized test reports.
10. Battery test allows you getting the voltage of battery with OBD port by the scan tool

when the engine starts.
11. DTC Library to lookup when user is operating this tool.
12. Upgrade via Computer
13. Multi-language: English, German, Dutch, Spanish, French.

TEN
SUPER ADVANTAGES

Diagnose Single Brand of all Models (OBDII-16DLC)
Full System Diagnosis
Support Oil Service Reset
Steering Angle Sensor (SAS) Calibration
Read &Clear DTC
Read Live Date
Support Battery Test
Support Data Review and Print
Full Speed Upgrade via Computer
Support Multi-Language
Available in Red, Black, Orange and Blue

OBDII FUNCTION

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating properly and
are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs,
certain vehicle conditions are recorded by the on-board
computer. This information is referred to as freeze
frame data. Freeze Data is a snapshot of the op-
erating conditions at the time of an em-ission-
related fault.
6. O2 Sensor Test -- This option allows retrieval
and viewing of O2 sensor test results for most
recently performed tests from the vehicle ' s on-
board computer.
7. On-Board Monitoring -- This function can be
utilized to read the results of on-board diagnostic
monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets
you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the
vehicle's service repair manual to determine the
procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehi-
cle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer sp-
ecific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream 
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc

15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test
modes include: CAN, ISO9141, KWP2000,
J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII
compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII
compliant DIESEL European vehicles

21. Works on most of 1996 and later OBDII
compliant US and Asian vehicles
22. View & Graph Live Data in Color Grap-
hing and blazing fast refresh rate for better
graphing and live data readings.
23. Comprehensive Help, Including OBD P-
arameter, Mode Explanations & More.

CONTENTS

FD V1.0 Main Unit
User's Manual
TF Card (In the main unit)
Main Cable
PC Connecting Cable
Nylon Carry Case

SPECIFICATIONS

Display: 2.8″TFT LCD, 320*240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V

Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W(Typical)
Dimension: 187.5*101*32 mm (L x W x H)

CONTENTS

four colors for Choice