Description

Features:
1. Industrial-Grade Main Control Chip: 16-level AD sampling accuracy, accurate real-time display of temperature, charging current, and discharging current, and power generation at a glance.
2. Auto Focus MPPT: Tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focus tracking.
3 Large-Screen LCD Displays: Charge and discharge parameters are adjustable. The ultra-wide charge and discharge are adjustable. As long as you understand the battery characteristics and set the corresponding charging parameters, you can charge any battery. The output can be adjusted when the power is turned off and off, which is more convenient (there is only time and no adjustment in the market).
4. Built-In Protection: Overheating, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller will automatically recover without damaging the equipment. Complete 3-stage charging management, effectively protect the battery, the battery is more durable.
5. Convenience: Two-way M0s tube anti-backflow circuit, high-power charging mode, ultra-low calorific value. R5.0 solar charging Dc plug, R5.0 DC lamp output DC plug, easy to connect.

 

Specification:
System voltage: 12V/24V adaptive
Rated charging current: 30A/40A/50A/60A (optional)
Solar photovoltaic voltage: 12V with 18V solar panel / 24V with 36V solar panel
Full voltage value:
Lithium battery: 12.2V
B02 gel type: 14.2V
B03 open type: 14.6V
Float voltage: 13.7V (default value, adjustable)
Discharge cut-off voltage: 10.7V (default value adjustable)
Discharge recovery voltage: 12.6V (default value adjustable)
Standby current: <10MA
USB output: 5V/2A Max
Working temperature: -35~+60℃
Shell material: ABS
Size: about 17x9.5x4cm/6.69x3.74x1.57inch

Notice:
1. The controller adapts automatically to 1V/24V. When installing for the first time, please make sure that the battery has enough voltage so that the controller can recognize the correct battery type.
2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect the normal voltage judgment.
3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel and other batteries). If you charge other batteries, you must be familiar with their battery characteristics and set the appropriate charging parameters. For example: when charging a 12V lithium battery, the output protection is prohibited and set to 9.5V, the full protection is 12.2V, and the charging voltage is 11.5V when the battery drops.
4. The controller can only use photovoltaic panels as the charging source, please do not use DC or other power sources as the charging source.
5. The controller will heat up when it is running. Please install the controller on a flat and well-ventilated surface.
(Please read the instruction manual carefully before use)
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

---