• How to Replace a Fuel Pump
  •  
  • What tools do you need to install a fuel pump?
  •  
  • The tools needed to replace your fuel pump vary, depending on what type of car you have. But, in general, you will need:
    • Safety glasses
    • A fire extinguisher
    • Wheel chocks
    • A jack and jack stands
    • A ratchet, various size sockets and various size wrenches
    • A set of pliers and/or a hose clamp removal tool (only required on some vehicles)
    • A fuel line disconnect tool (only required on some vehicles)
    • Transmission jack or equivalent to support the fuel tank (sometimes a regular jack and block of wood can be substituted)
     
  • Fuel Pump Module For 1994 1995 1996 Mercury Tracer Ford Escort 1.8L E2151H

    How to Replace a Fuel Pump

     

    What tools do you need to install a fuel pump?

     

    The tools needed to replace your fuel pump vary, depending on what type of car you have. But, in general, you will need:

    • Safety glasses
    • A fire extinguisher
    • Wheel chocks
    • A jack and jack stands
    • A ratchet, various size sockets and various size wrenches
    • A set of pliers and/or a hose clamp removal tool (only required on some vehicles)
    • A fuel line disconnect tool (only required on some vehicles)
    • Transmission jack or equivalent to support the fuel tank (sometimes a regular jack and block of wood can be substituted)

     

    Fuel tank replacement when dropping the tank is required

     

    The following outlines a typical in-tank fuel pump replacement and should be used for informational purposes only. Be sure to consult the factory repair manual to determine the exact procedure and safety precautions for your vehicle.

     

    Removal

    1. Put on your safety glasses and have a fire extinguisher nearby.
    2. Safely raise and support the rear of the vehicle using a jack and jack stands. Set the parking brake and chock the front wheels.
    3. Disconnect the negative battery cable.
    4. Relieve fuel system pressure following the procedure found in the factory repair information.
    5. Drain the fuel tank if it has a lot of fuel. Usually, this is done using a hand-operated pump or siphon. If you choose to leave the tank full, it will be a lot heavier and harder to balance.
    6. Loosen the clamp on the fuel filler neck, then disconnect the neck from the fuel tank.
    7. Support the fuel tank with a transmission jack or equivalent.
    8. Remove the fuel tank strap bolts and the straps themselves.
    9. Lower the tank just enough to access and disconnect the fuel hoses, electrical connections and emissions hoses.
    10. Once everything is disconnected, lower the tank completely.
    11. Clean the area around the pump access hole to prevent dirt and debris from entering the tank.
    12. Remove the retainer ring or bolts securing the pump assembly to the tank.
    13. Remove the fuel pump and seal ring from the fuel tank.

     

    Installation

    1. Compare the replacement pump to the new pump assembly to ensure a match.
    2. Install the new seal ring and new pump assembly in the tank.
    3. Using a transmission jack or equivalent, raise the tank just enough to reconnect the fuel hoses, electrical connections and emissions hoses.
    4. Raise the tank into place.
    5. Reinstall the fuel filler neck and secure it with a clamp.
    6. Reinstall the fuel tank straps and torque the mounting bolts to the specification listed in the factory repair manual.
    7. Safely remove the jack stands and lower the vehicle.
    8. Reconnect the negative battery cable.
    9. Fill the fuel tank as needed.
    10. Start the vehicle and double-check your work, looking for leaks.

     

    Fuel tank replacement when there’s a handy access cover

     

    Replacement is quite a bit easier if you have a pump with an under-seat access cover. The following outlines a typical in-tank fuel pump replacement and should be used for informational purposes only. Be sure to consult the factory repair manual to determine the exact procedure and safety precautions for your vehicle.

     

    Removal

    1. Put on your safety glasses and have a fire extinguisher nearby.
    2. Disconnect the negative battery cable.
    3. Relieve fuel system pressure following the procedure found in the factory repair information.
    4. Remove the rear seat or rear seat cushion as necessary.
    5. Remove the in-floor access cover.
    6. Disconnect the fuel hoses, electrical connections and emissions hoses from the pump assembly.
    7. Clean the area around the pump access hole to prevent dirt and debris from entering the tank.
    8. Remove the retainer ring or bolts securing the pump assembly to the tank.
    9. Remove the fuel pump and seal ring from the fuel tank.

     

    Installation

    1. Compare the replacement pump to the new pump assembly to ensure a match.
    2. Install the new seal ring and new pump assembly in the tank.
    3. Reconnect the fuel hoses, electrical connections and emissions hoses.
    4. Reinstall the in-floor access cover.
    5. reinstall the rear seat or rear seat cushion as necessary.
    6. Reconnect the negative battery cable.
    7. Fill the fuel tank as needed.


    Item Specifics
    Type Fuel Pump
    Fuel Type Gasoline
    Placement on Vehicle Fuel Tank
    Inlet Type Strainer
    Outlet Quantity 2
    Fuel Level Sender Resistance 16-160
    Terminal Quantity 6
    Terminal Gender Male
    Terminal Type Pin
    Flow Rate 41
    Pressure 36-73 psi
    Outlet Outside Diameter 0.375 in
    Outlet Type Hose Quick Connect
    Voltage 12
    Manufacturer Part Number AM13350801S
    Items Included Mounting Hardware
    Manufacturer Warranty 1 Year
    Superseded Part Number SP2151H,HP10183
    Universal Fitment No
    Brand am-motors2020
    OE/OEM Part Number SP2151H,HP10183
    Interchange Part Number E2151H,F5CZ9350B

    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
     
    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact!
    Return
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer
    Feedback
    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
    We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 
    Payment
    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Warranty
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.

    Shop Category
    Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Fuel Pump Module For 1994 1995 1996 Mercury Tracer Ford Escort 1.8L E2151H

    How to Replace a Fuel Pump

     

    What tools do you need to install a fuel pump?

     

    The tools needed to replace your fuel pump vary, depending on what type of car you have. But, in general, you will need:

    • Safety glasses
    • A fire extinguisher
    • Wheel chocks
    • A jack and jack stands
    • A ratchet, various size sockets and various size wrenches
    • A set of pliers and/or a hose clamp removal tool (only required on some vehicles)
    • A fuel line disconnect tool (only required on some vehicles)
    • Transmission jack or equivalent to support the fuel tank (sometimes a regular jack and block of wood can be substituted)

     

    Fuel tank replacement when dropping the tank is required

     

    The following outlines a typical in-tank fuel pump replacement and should be used for informational purposes only. Be sure to consult the factory repair manual to determine the exact procedure and safety precautions for your vehicle.

     

    Removal

    1. Put on your safety glasses and have a fire extinguisher nearby.
    2. Safely raise and support the rear of the vehicle using a jack and jack stands. Set the parking brake and chock the front wheels.
    3. Disconnect the negative battery cable.
    4. Relieve fuel system pressure following the procedure found in the factory repair information.
    5. Drain the fuel tank if it has a lot of fuel. Usually, this is done using a hand-operated pump or siphon. If you choose to leave the tank full, it will be a lot heavier and harder to balance.
    6. Loosen the clamp on the fuel filler neck, then disconnect the neck from the fuel tank.
    7. Support the fuel tank with a transmission jack or equivalent.
    8. Remove the fuel tank strap bolts and the straps themselves.
    9. Lower the tank just enough to access and disconnect the fuel hoses, electrical connections and emissions hoses.
    10. Once everything is disconnected, lower the tank completely.
    11. Clean the area around the pump access hole to prevent dirt and debris from entering the tank.
    12. Remove the retainer ring or bolts securing the pump assembly to the tank.
    13. Remove the fuel pump and seal ring from the fuel tank.

     

    Installation

    1. Compare the replacement pump to the new pump assembly to ensure a match.
    2. Install the new seal ring and new pump assembly in the tank.
    3. Using a transmission jack or equivalent, raise the tank just enough to reconnect the fuel hoses, electrical connections and emissions hoses.
    4. Raise the tank into place.
    5. Reinstall the fuel filler neck and secure it with a clamp.
    6. Reinstall the fuel tank straps and torque the mounting bolts to the specification listed in the factory repair manual.
    7. Safely remove the jack stands and lower the vehicle.
    8. Reconnect the negative battery cable.
    9. Fill the fuel tank as needed.
    10. Start the vehicle and double-check your work, looking for leaks.

     

    Fuel tank replacement when there’s a handy access cover

     

    Replacement is quite a bit easier if you have a pump with an under-seat access cover. The following outlines a typical in-tank fuel pump replacement and should be used for informational purposes only. Be sure to consult the factory repair manual to determine the exact procedure and safety precautions for your vehicle.

     

    Removal

    1. Put on your safety glasses and have a fire extinguisher nearby.
    2. Disconnect the negative battery cable.
    3. Relieve fuel system pressure following the procedure found in the factory repair information.
    4. Remove the rear seat or rear seat cushion as necessary.
    5. Remove the in-floor access cover.
    6. Disconnect the fuel hoses, electrical connections and emissions hoses from the pump assembly.
    7. Clean the area around the pump access hole to prevent dirt and debris from entering the tank.
    8. Remove the retainer ring or bolts securing the pump assembly to the tank.
    9. Remove the fuel pump and seal ring from the fuel tank.

     

    Installation

    1. Compare the replacement pump to the new pump assembly to ensure a match.
    2. Install the new seal ring and new pump assembly in the tank.
    3. Reconnect the fuel hoses, electrical connections and emissions hoses.
    4. Reinstall the in-floor access cover.
    5. reinstall the rear seat or rear seat cushion as necessary.
    6. Reconnect the negative battery cable.
    7. Fill the fuel tank as needed.

    Item Specifics
    Type :Fuel Pump
    Fuel Type :Gasoline
    Placement on Vehicle :Fuel Tank
    Inlet Type :Strainer
    Outlet Quantity :2
    Fuel Level Sender Resistance :16-160
    Terminal Quantity :6
    Terminal Gender :Male
    Terminal Type :Pin
    Flow Rate :41
    Pressure :36-73 psi
    Outlet Outside Diameter :0.375 in
    Outlet Type Hose :Quick Connect
    Voltage :12
    Manufacturer Part Number :AM13350801S
    Items Included :Mounting Hardware
    Manufacturer Warranty :1 Year
    Superseded Part Number :SP2151H,HP10183
    Universal Fitment :No
    Brand :am-motors2020
    OE/OEM Part Number :SP2151H,HP10183
    Interchange Part Number :E2151H,F5CZ9350B


    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
     
    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer
    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
    We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 
    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.

    All rights reserved.