Specifications: H1 LED Bulb
Chip Type: 16 CSP Chips
Bulb Side Type: 2 Sides
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM/Set & 8000LM/bulb
Operating voltage: DC9-30V
Material: Aluminum PCB and PA66+30% GF Plastic
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Waterproof rate: IP 65
Certifications: CE, RoHS, ISO9002
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Package Included:
2x H1 LED headlight Bulbs
Chip Type: 16 CSP Chips
Bulb Side Type: 2 Sides
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM/Set & 8000LM/bulb
Operating voltage: DC9-30V
Material: Aluminum PCB and PA66+30% GF Plastic
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Waterproof rate: IP 65
Certifications: CE, RoHS, ISO9002
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Package Included:
2x H1 LED headlight Bulbs
Advanced Design:
H1 LED car headlights, and halogen bulbs, the same design structure, fixed base and radiator integrated molding, small size, no need to worry about the lack of space caused by the inability to install the problem.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.
Specifications: H1 LED Bulb
Chip Type: 16 CSP Chips
Bulb Side Type: 2 Sides
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM/Set & 8000LM/bulb
Operating voltage: DC9-30V
Material: Aluminum PCB and PA66+30% GF Plastic
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Waterproof rate: IP 65
Certifications: CE, RoHS, ISO9002
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Package Included:
2x H1 LED headlight Bulbs
Chip Type: 16 CSP Chips
Bulb Side Type: 2 Sides
light Source Model: Chip,two side leds,super bright
Power: 100w/Set & 50w/bulb
Lumen: 16000LM/Set & 8000LM/bulb
Operating voltage: DC9-30V
Material: Aluminum PCB and PA66+30% GF Plastic
Color Temperature: 6000K-6500K Cool White
Lifespan: over 50000h
Waterproof rate: IP 65
Certifications: CE, RoHS, ISO9002
Application: LED Headlights Headlamp Lamp Bulbs High or Low Beam
Package Included:
2x H1 LED headlight Bulbs
Advanced Design:
H1 LED car headlights, and halogen bulbs, the same design structure, fixed base and radiator integrated molding, small size, no need to worry about the lack of space caused by the inability to install the problem.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light bulb when adjusting the bulb.