Cisco Nexus N7K-C7010 21U 7000 Series 10 Slot Network Chassis 1x N7K-F348XP-25

In Good Condition, Full Working Order

Tested

2 Year Warranty

Faceplate Damaged - Broken Catch and Status Light Cover (see pictures)

Included:

• 1 x Cisco Nexus N7K-C7010 7000 Series 21U 10-Slot Network Chassis with:
• 1 x Cisco Nexus 7000 Series N7K-F348XP-25 F3-Series 48-Port 1/10GbE SFP/SFP+ Plug-in Expansion Module
• 5 x N7K Module Blank N7K-MODULE-BLANK
• 2 x Cisco Nexus N7K-SUP2E Supervisor Engine Module 2nd Generation 7000 Series
• 5 x Cisco Nexus 7010 Fabric Module N7K-C7010-FAB-2
• 2 x Cisco Nexus 7000 Series Network Clock Module Blank N7K-CLK-BLANK
• 2 x Cisco Nexus 10-Slot Fabric Fan Tray N7K-C7010-FAN-S
• 2 x Cisco Nexus 10-Slot Fabric Fan Tray N7K-C7010-FAN-F
• 3 x Cisco Nexus 7000 6000W Redundant Power Supply N7K-AC-6.0KW

Description:

• The Cisco Nexus 7000 Series 10-slot chassis with up to eight I/O module slots supports up to 256 10 Gigabit Ethernet or 384 Gigabit Ethernet ports, meeting the demands of large deployments.
• Front-to-back airflow helps ensure that use of the Cisco Nexus 7000 Series 10-slot chassis addresses the requirement for hot-aisle and cold-aisle deployments without additional complexity.
• The system uses dual system and fabric fan trays for cooling. Each fan tray is redundant and composed of independent variable-speed fans that automatically adjust to the ambient temperature, helping reduce power consumption in well-managed facilities while providing optimum operation of the switch. The system design increases cooling efficiency and provides redundancy capabilities, allowing hot swapping without affecting the system; if either a single fan or a complete fan tray fails, the system continues to operate without a significant degradation in cooling capacity.
• The system supports an optional air filter to help ensure clean air flow through the system. The addition of the air filter satisfies Network Equipment Building Standards (NEBS) requirements.
• I/O modules and supervisor modules are accessible from the front, and fabric modules, power supplies, and fan trays are accessible from the back.

10-Slot Chassis Specification:

Product compatibility:

• Supports all Cisco Nexus 7000 Series Supervisor and I/O modules
• Supports Fabric1 and Fabric2 modules

Max local switching capacity:

• 600 Gbps

Max inter-slot switching capacity:

• 550 Gbps

Software compatibility:

• Cisco NX-OS Software Release 4.0 or later

Options:

• Air filter
• Lockable front module doors

Performance:

• 5.76 bpps (IPv4 unicast) in combination with supervisor and fabric modules

Reliability and availability:

• OIR of all redundant components: Supervisor and fabric modules, power supplies, and fan trays

MIBs:

• Supports SNMPv3, v2c, and v1 (see Cisco NX-OS Software release notes for details about specific MIB support)

Network management:

• Cisco DCNM 4.0 or later

Programming interfaces:

• XML
• Scriptable CLI
• Cisco DCNM 4.0 web services

Physical specifications:

• Usable rack space: 21RU
• 10-slot chassis: 2 dedicated supervisor modules and 8 I/O modules
• 5 fabric module slots
• 3 power supply slots
• Dimensions (H x W x D): 36.5 x 17.3 x 33.1 in. (92.7 x 43.9 x 84.1 cm)
• Chassis depth including cable management and chassis doors is 38 in. (96.5 cm)
• Unit is rack mountable in a standard 19-inch (482.6-mm) EIA rack
• Weight
• Chassis only: 200 lb. (90 kg)
• Fabric Module: 4 lb (1.8 kg)
• System Fan Tray: 20 lb (9.1 kg)
• Fabric Fan Tray: 5 lb (2.3 kg)
• Supports 6-kW and 7.5-kW AC and DC power supplies

Environmental specifications:

• Airflow direction: Bottom front of chassis to top back
• Operating temperature: 32 to 104°F (0 to 40°C)
• Operational relative humidity: 5 to 90%, noncondensing
• Operating altitude: -500 to 13,123 ft. (agency certified 0 to 6500 ft.)
• Seismic: Zone 4 per GR63
• Floor loading: 190 lb. per sq. ft.
• Operational vibration
• GR63, Section 5.4.2
• ETS 300 019-1-3, Class 3.1, Section 5.5
• Storage altitude: 1000 to 30,000 ft.
• Storage temperature: -40 to 158°F (-40 to 70°C)
• Storage relative humidity: 5 to 95%, noncondensing
• Heat dissipation: Maximum 12,000W per chassis (actual dissipation will be lower, depending on the chassis configuration)

N7K-F348XP-25

Cisco Nexus 7000 Series Switches are the foundation of Cisco Unified Fabric and meet the demands of mission-critical data centers. They deliver exceptional availability, scalability, and the proven, comprehensive feature set of Cisco NX-OS Software. The Cisco Nexus 7000 Series Switches provide integrated resilience and are optimized for availability, reliability, scalability, and ease of management. A single chassis supports up to 768 native 10-Gbps ports, 192 40-Gbps ports, and 96 100-Gbps ports. The Cisco Nexus 7000 F3-Series module is a low-latency, high-performance, high-density 1/10 Gigabit Ethernet module. It supports all Cisco Nexus 7000 Series Switches and shares a common system architecture and application-specific integrated circuit (ASIC) technology.

Quick Specs:

• Ports: 48 ports of 1 and 10 Gigabit Ethernet (SFP or SFP+)
• Product Line: Nexus 7000 F3-Series
• Form Factor: Plug-In Module
• Manufacturer: Cisco
• Type: Ethernet Module
• Model: N7K-F348XP-25
• Software Compatibility: Cisco NX-OS Software Release 6.1.2 or later
• Dimensions: 1.7" x 15.3" x 21.9"
• Weight: 14lbs
• Jumbo Frame Support: 9,216 bytes
• VLAN: 4,096 simultaneous VLANs per VDC
• MAC Address Table Size: 64K entries

CS 304455 crd dup dup .com