Please Read Description.

THIS IS NOT AN ITEM FOR SALE!
THIS LISTING IS FOR CRASH DATA RESET SERVICE!

It means that you will need to send your original SRS module to us for crash data reset.

This service suitable for you if your vehicle have been involved in the accident and your seatbelt or airbag deployed.

The Crash Data Cannot be erased by diagnostic equipment and a new airbag module can be expensive and will in most cases also need coding to your vehicle. But we can reset your old airbag module back to its original condition.

To check if we can reset your module please send us the part number which stated on your airbag module, or if you unsure which part number to send please send us picture of your SRS module from both sides.

IMPORTANT!

This listing is for crash data reset only. If your module have internal fault, or you got no communication with your SRS module, crash data reset won't help you. Its buyers responsibility to diagnose problem in vehicle. After you buy our crash data reset service on Ebay, you must send your SRS module to address stated at the bottom of description. (We'll provide our address via ebay messages once you buy our listing.) Please bear in mind you will have to cover SRS module shipment costs from your own expenses.

All you need to do in 3 easy steps:

STEP 1: Remove your SRS module from your vehicle and match the part numbers of your SRS module and the part numbers stated in title, if the part numbers are different please contact us and we will provide you a correct listing.

STEP 2: Click (Buy it Now) and print a purchase receipt (If you have no printer then please enclose a note with your return details and phone number) and send it along with your item to us. Securely pack your item and post it to: Transelot, 50A Lawson Street, Kettering, NN16 8XU.

STEP 3: Once we have received your unit we will clean the crash data off your SRS module on the same or next working day and post it back to you.

INTERNAL FAULT

Sometimes the airbag light on the dashboard will show even if the vehicle has not been in an accident in which the restraint systems were deployed. This normally means that the airbag control unit has developed an internal error which can either be caused by corrupted data or physically damaged hardware or components. An internal error can occur during electrical surges or water intrusion onto the ECU's printed circuit board.

REPLACING YOUR AIRBAG ECU

If you need to replace the airbag ECU the best way to make sure to find one which is compatible with your vehicle is to match the part numbers on the unit itself with the unit that you might potentially buy. Also it's best to make sure that the ECU that you are purchasing does not have crash data stored or indeed an internal error. In case if you had to purchase second hand SRS module, we can program it to your vehicle for extra cost.

THE CRASH DATA RESET

By far the easiest way to get your airbag system back to a fully functional state after the car accident is to reset the original airbag ECU to its original state. (Some internal faults can be caused by the accident itself and so no-one can 100% guarantee that the crash data clearance will work). One of the main advantages to resetting the original airbag ECU from the vehicle is the fact that you won't have the extra cost of re-coding it to your vehicle as the original will already have the correct data for your vehicle.

THE LOCATION OF SRS MODULE

SRS unit is located behind the centre console directly below the radio, bolted to the floor. This is the same on most vehicles. You can't miss it as its a little square unit with yellow connectors at the front.

REMOVING AND REFITTING THE AIRBAG MODULE

It is always advised that you get a professional mechanic to remove and refit the Airbag ECU but if you believe yourself to be competent enough, once you have located and identified the airbag ECU firstly disconnect the negative battery lead, then remove any trim or carpet so that you can access the module's retaining bolts. Remove the bolts and lift the ECU just enough so that you can carefully disconnect the plugs, but make sure you've done it correctly without damaging the ECU. For refitting please do everything in reverse order.

Short list of the SRS modules we can help you with:

89170-08110
89170-08210
89170-08230
89170-0A100
89170-0A140
89170-0C660
89170-0C670
89170-0DE20
89170-0DF30
89170-0DF40
89170-0DF50
89170-0H220
89170-16180
89170-28480
89170-42F10
89170-42690
89170-42700
89170-48E30
89170-52Q10
89170-52Q20
89170-52Q70
89170-52P60
89170-52P70
89170-60D70
89170-60D80
89170-60F90
89170-78150
89170-K0010
89170-K0060
89170-K0070
89170-K0080