Features
Knob comes with start and stop function
Slow start and slow stop time can be set
Limit the upper and lower limit of the speed
Frequency 1-100KHZ can be set
Use digital encoder knob, stable and durable, high precision and better consistency
Parameters can be set for power-down storage
Product parameter
Input voltage: DC6-60V (the specific voltage is equal to the rated voltage of the motor)
Output voltage: linear under load
Output current: 0-30A
Continuous current: within 20A
Speed regulation type: current regulation
speed regulation method: encoder knob 360 degrees
Speed adjustment range: 0-100% can be set
Frequency: 1-100KHZ can be set
Slow start and slow stop: Can be set
Digital speed display: 0-100 percentage meter
Wiring type: Barrier terminal block
Support motor: brushed motor
Module size: length * width * height 96mm*61mm*34mm
Panel opening: length * width 92mm*56mm
Installation method: embedded
Package Includes:
1 x Speed Controller
Digital encoder knob operation
Short press-switch motor start and stop
Long press-enter the setting interface
Clockwise-increase
Counterclockwise-Decrease
Enter the setting interface short press: switch function 1 function 2 function 3 function 4 function 5 function 6 long press to save and exit
Enter the setting interface to rotate: turn left to decrease the value, turn right to increase the value
low start time setting Function 1: 000-100 The slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.
Slow stop time setting Function 2: 000-100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Speed lower limit setting function 3: 000-080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting value. The default is 0.
Speed limit setting function 4: 000-100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%.
Acceleration and deceleration value setting Function 5: 001 002 005 010 015 020 025 The speed changes correspondingly for each revolution 1%, 2%, 5%, 10%, 15%, 20%, 25%.
Frequency setting function 6: adjustable between 1-100KHZ, default 15KHZ
Notice:
The input voltage must be divided into positive and negative, not 220V
The input voltage should be equal to the rated voltage of the motor within 6-60V
Such as the motor 12V input 12V, the motor 36V input 36V
