Application:

Universal.

Features and Benefits:

Fully regulates the front to rear brake pressure by placing the valve in line to the rear brakes.  More pressure is then applied to the front giving a much better overall braking performance.

FEATURES: 100 - 1000+ PSI range Precise adjustment from easy to use lever Five super hold click adjustment system Increase/decrease front to rear bias in cockpit Machined form aluminium billet Anti corrosive internals Accurate and quick response.

Dimensions& Material:

Inlet and outlet posts are 1/8 NPT

Made of high quality Aluminium.

Color: Black

Installation Instructions:

Drain the brake fluid before you do anything else.

Use the two 0.25" body holes to secure the valve to a mount.

Connect the "IN" port to the pressure line coming from the master cylinder.

Connect the line going to the calipers to the "OUT" port.

Rotating the adjuster knob clockwise until it is all the way in.

Bleed the brake and check for any leaks at the valve or its fittings.

Do some test braking to adjust the bias before it works properly.

Cautious: Make sure the valve isn't rubbing against any other brake lines or contact with the hood. Brings a much better overall braking performance.

Operation:

The knob rotated all the way out (counter-clockwise) will provide a maximum pressure reduction of 60%.

Rotating the know in (clockwise) will incrementally increase line pressure, up to full pressure.

Note:

Will come with everything you see in the picture.  Please allow 0.5-1 inch difference due to manual measurement. (1 inch=2.54cm)

Please check that the picture matches before purchase.  The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

For any inquiries or special requests such as larger amount ordering please write to us.