Please Note: Diameters of the fittings is the internal sizes, diameter of the Pipe lengths are the external sizes.

All of the dimensions for the fittings will fit the corresponding size piping, e.g. pipe with a 40mm external diameter will fit into our 40mm fittings.

Straight Coupling – Used for permanently joining two pieces of equally sized pipe in a straight line.

45 Degree Elbow – Used for permanently joining two pieces of equally sized pipe at a 45-degree angle.

90 Degree Elbow – Used for permanently joining two pieces of equally sized pipe at a 90-degree angle.

Tee Piece – Used for permanently joining three pieces of equally sized pipe at 90-degree angles.

End Cap – Used to permanently seal the end of a piece of pipe.

Union Connector – Used for joining two pieces of equally sized pipe in a straight line but can be unscrewed later for easy access / maintenance.

None Return Valve – Used to prevent water back siphoning down the pipe when water pump is stopped. Ideal for applications where there is limited capacity in the sump to accept excess water.

Pipe Clip – Used to secure pipe to wall / cabinetry to hold securely in place.

Double Union Ball Valve – Used to regulate or stop water flow down the pipe. The unions on both sides allow the valve to be easily disconnected for maintenance and cleaning.

Simple Ball Valve – Used to regulate or stop water flow down the pipe.

If you have any questions, then kindly please contact us via the ‘Ask a question’ Tab which is located on the bottom of the listing page.