The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish.
Perfect for tabletops, fiberglass work, small castings (under 1.2"), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs.

This product provides fast cure and property development at ambient and low temperatures without accelerators and allows for quick return to service.   
Full cure time is 8-12 hours in Summer,  24 hours in Winter. Hardness range 70-80D 
This product cures to a brilliant high gloss finish.  The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass.  

Note: 
The resin mixed, pour No more than 150ml Each time, with a thickness range of 0.4" -1.2" (1-3cm), to avoid bursting.
and you can go as deep as you like,just make sure to work in stages. 
stay under 1.2" per pour. 
after the surface film cures begin your second pour.
the surface set time is roughly 1 hour at room temp.

The resin 1:1 mix ratio by volume, can deep pour up to 1.2" / 3CM one time 
200ml kit :   100ml resin A + 100ml hardener B (Total 200ML) 
500ml kit :   250ml resin A + 250ml hardener B (Total 500ML) 
1L kit :   500ml resin  A + 500ml hardener B  (Total 1L) 
2L kit :   1L resin A + 1L hardener B   (Total 2L) 
4L kit :   2L resin  A + 2L hardener  B  (Total 4L) 
8L kit :   4L resin  A + 4L hardener  B  (Total 8L) 

Important
This chemical needs to be stored in a dry, safe, temperature controlled environment.  Always keep the lids tightly sealed when not in use.  Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener.  Moisture is also a potential issue.  Always keep the bottles sealed when not in use.  

When applying this product, use gloves, goggles, and proper safety equipment.  Please refer to the safety data sheet before using any of our epoxy products.