Kings Domin8r Xtreme 7” LED Driving Lights Pair + Plug N Play Smart Harness Kit

 KINGS DOMIN8R 7” LED DRIVING LIGHTS (PAIR)

 

PERFORMANCE DOESN’T HAVE TO BREAK THE BANK!

These lights have a lab-proven 1 Lux @ 684m – that’s enough light to read a newspaper at a distance of 684m! They also produce a thumping 10,844 lumens, which translates to an incredible real-world flood of light directly in front of your vehicle – just as important as being able to see right down the middle of a long straight road.

HIGH-PERFORMANCE LEDS

That type of performance is thanks to the fact these lights are fitted with 18 high-performance LEDs and a new generation reflector cup with enhanced reflection angle to make the most of the light being produced.

ULTRA-TOUGH MOUTING SYSTEM

But performance isn’t the whole story – because we’ve also made these lights INSANELY tough too! You get a pair of 3mm re-inforced folded-steel brackets with four alignment bolts per light, so that once you’ve fitted and adjusted your driving lights, they stay adjusted.

THE STRENGTH DOESN’T STOP THERE

Then add in a diecast aluminium body with in-built passive cooling for component longevity, a polycarbonate lens, and an IP68 rating that means these lights will run under water at a depth of 1m for 30min!, and you can see why we say they’re built TOUGH!

RUN ‘EM ON 12V OR 24V

These high-tech lights feature over & under-voltage protection as well as an ability to run on 12v and 24v, so they’re perfect for just about machine from the smallest car to the biggest tractor.

LAB-PROVEN PERFORMANCE

Like all Adventure Kings driving lights and lightbars, the 7inch Domin8r Driving Lights are tested in a NATA-accredited Australian lab and proven to produce a genuine 1 lux @ 684m and 10,844 lumens per pair.

 

LEDs 18 x high-performance LEDs
Lumens 10,844 lumens (pair)
Lux 1 lux @ 684m
Amp Draw 12.46 @ 14.4V(pair)
Power Draw 179w (pair)
IP Protection IP68
Color Temp 7857k
Voltage Compatibility 12 & 24V
Housing Die-Cast Aluminium
Connection Waterproof Deutsche recessed into light body
Mounting 3mm folded-steel with 4 adjustment bolts
Dimensions (with brackets) 194mm (H) x 177mm (W) x 85mm (D)
Weight 1.5kg (ea)

 

 

Adventure Kings Smart Plug N Play Wiring Harness Kit Duetsch plugs easy install

 

Adventure Kings Smart Harness | Plug n Play Spotlight Wiring Harness | Easy DIY Install | Deutsch plugs
PLUG N PLAY

Solving the age-old problem of trying to figure out if your vehicle is positively or negatively switched, the Plug N Play does the work for you!

PLUGS STRAIGHT

Directing power where it is needed straight out of the box, the kit allows you to have your lights installed and up & running in no time.

HEAVY-DUTY 12AWG CABLE

Utilising thick 12AWG (3.31mm²) wire, the Plug N play will efficiently deliver power into your Adventure Kings Driving Lights or LED Light Bar – allowing you to take full advantage of the HUGE amount of light they emit.

IN-LINE BLADE FUSE & WATERPROOF DEUTSCH PLUGS

Protected by a replaceable in-line blade fuse along with weather and heat resistant cable protectors, which easily connect directly to your lights using waterproof Deutsch plugs. This wiring kit was designed for the rough & tough of Australian 4WDing, from scorching deserts to treacherous water crossings.

FLUSH MOUNTED SWITCH

Connecting to a flush mounted switch, which conveniently mounts inside the cab, you’ll have full control of your lights right from the driver’s seat.

INCLUDES

Wiring Harness

40A Relay

Backlit LED Switch

In-Line Fuse

2 to 1 Deutsch Splitter Cable

H4 & HB3 Adapters

 

 

Live wire gauge: 12AWG
Relay to Deutsch plug: 2700mm
Relay to trigger (headlight): 2000mm
Relay to switch: 2650mm
Single to Double Splitter: 1000mm
Fuse: 25A
Relay: 40A