Features:

1.Before using this product, please insert the TF card into the corresponding TF socket, and then connect the SATA power and SATA data cable to the SATA host device. After power on, the LED flashes, indicating that the TF data is read normally.

2.After the initial use and TF card configuration change, you need to initialize TF card operation and format. After formatting is completed, you can do any data operation on TF card.

Specification:

Applicable:TF card (micro SD card)

Interface:SATA

Replace SATA with 4 micro SD cards, can do system boot through micro SD

Support SATA hot-plugging

Does not support UHS-I

No driver required

Support system: Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux (Note: EXT4 file system is not supported)

Caution:

1.This product can use 1 TF card, 2 and 4 TF cards at the same time, it does not support using 3 TF cards at the same time.

2.Please pay attention to the order of card insertion: when using 1 TF, please insert the TF card in TF1 card holder, when using 2 TF, please insert the TF card in TF1, TF2 card holder, and so on. If you do not insert the cards in order. The product will not recognize the TF card normally.

3.Use the same size TF card as much as possible. When using TF cards of different capacities, the capacity of the group RAID 0 is a multiple of the minimum capacity TF card and the number of TF cards. (For example, a 2G, the other three 32G, then it is the minimum capacity of 2G * 4 = 8G)

4.TF card does not support hot-swapping.

5.For the safety of your data, please make a good backup of important information before use.

6.TF card group RAID 0, TF card location can not be swapped, otherwise the data will likely be damaged (TF card initialization, the data will be damaged). Please mark the location of the TF card well before use to prevent the location from being switched.

Package Includes:

1pcs*Adapter (TF card not included)