Integrated Circuit IC Chip Tester 5V/3.3V/Auto Mode Digital Transistor IC Chips Detector Professional Integrated Circuit Tester for Operational Amplifier/Optocouplers/Regulator
Feature:
1. Maintenance Guide: This integrated circuit ic chip tester, is a multi-functional maintenance tester designed specifically for front-line maintenance personnel.
2. Integrated Chip Transistor Data Models: With over 1300 integrated chip data models and 420 transistor data models, this transistor tester covers most common devices within 24 pins, reducing maintenance workload and improving efficiency.
3. Compatible with Various Series Chips:This digital transistor ic chips detector can test various chips such as 74ch series, osmo series, cd4000 series, hef4000 series, and 4500 series, operational amplifiers, interface chips, optocouplers, and transistor automatic recognition, enabling comprehensive testing of different types of chips.
4. Low Power Consumption: With a 9V stacked battery that has similar power consumption to a standard digital multimeter battery, this integrated circuit tester provides reliable and cost-effective power source.
5. Easy-to-Use with Automatic Self-Check Function: Upon first starting up the device and pressing the Enter key, it will automatically run a self-check. If the battery voltage is above 7V, the transistor ic chips meter will start measuring. With its native AD 10AD and theoretical resolution of 0.0048V at 5V voltage, this device provides accurate measurements.

 

Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Model Number: Transistor Tester
Power supply: 2 No. 5 batteries (not included, self provided)
Shell material: ABS
Packaging size: approximately 150x100mm/5.90x3.93In
The equipment positioning method is as follows:
1. Place the chip and optocoupler on the top of the aligned 1-pin IC alignment seat.
Most transistors on the left have three slots.
The 13 feet and 14 feet of the IC regulator have been placed.
Note: The transistor display pins correspond to IC blocks of 10 feet, 11 feet, and 12 feet from left to right. (without built-in battery or adapter)
For multifunctional frontline maintenance engineering testers, there are c different hook testing modes:
5v mode/3.3v mode/automatic mode
Capable of testing 74ch series, osmo series, cd4000 series, hef400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic recognition of transistors, and voltage value recognition of voltage regulators.
It integrates over 1300 chip data models and over 420 transistor data models, covering the most common devices within a 24 foot range, greatly reducing maintenance workload and improving maintenance efficiency.
The maintenance assistant's 9V stacked battery, like a regular multimeter battery, consumes a very ordinary digital multimeter. Press Enter to turn on the power
Explanation: Due to the use of battery power, it is not suitable for measuring high-power thyristors. The Zener value must be based on actual measured values, not just nominal values. The default directory for initialization is the search directory. The optocoupler testing of ordinary optocouplers has up to ten parameters. Simply measuring the optocoupler logic ratio does not have much practical significance. This machine can test the secondary saturation voltage of the optocoupler for reference. Test a standard 4-foot optocoupler.
Instructions for the use of multifunctional integrated circuit tester:
The TSH series multifunctional integrated circuit tester is a professional equipment designed by first-class microelectronic engineers and maintenance teams

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.