Feature:
1. The product has a variety of functions, such as no dripping of sugar, one‑button start, quick sugar discharge, accurate sugar control, intelligent temperature control.
2. This fructose dispenser is equipped with a digital display and three indicator lights, which respectively display the heating and feeding status.
3. The lid and lining of the equipment are made of 304 stainless steel, which meets safety and hygiene standards, and is resistant to oxidation.
4. The bubble tea dispenser adopts stainless steel fructose outlet, movable leakage, easy to clean.
5. The fructose quantitative machine uses a microcomputer to control the output of fructose ratio through 16 storage keys.
Specification:
Item Type: Fructose Machine
Product Size: Approx. 25 x 25 x 40.3cm / 9.8 x 9.8 x 15.9in
Weight: Approx. 6500g / 229.3oz
Power: 400W
Material: Black Steel Paint + Stainless Steel + Iron
Voltage: 220V
Plug: CN Plug
Frequency: 50Hz
Capacity: 6.5L
How to Use:
1. Please clean the barrel with 70℃ warm water for the first use, and then pour in fructose after wiping it to make up for fructose.
2. Force heating for 5-15 minutes after starting up, the temperature does not the set temperature (default 40 degrees), the quantitative keyboard will be locked, the screen will display the current temperature, and it can be used after the screen displays "E-dy"
3. Long press the "continuous switch" button for 5 seconds to output sugar, output the unheated fructose (100ml) in the tube, and then press the "continuous switch" button to stop the sugar output, and let the fructose machine run 2-3 times to ensure accuracy
4. setting: (Example: set the 1-1 button to output 10ml of sugar; 1-2 button to output 15ml)
Set the 1-1 button to output 10ml of sugar, wait for the heating to complete, the screen displays "E-dy". Short press the "Set" button, then press the 1-1 button, the quantitative value is displayed 3 Press the AV button to set the 1-1 value to 10, and press 1 "Save" to exit. Put the measuring cup, display "E-dy" and press the 1-1 button to discharge the sugar. After the sugar discharging is completed, the sugar amount is detected. If the sugar output meets the requirements, no further adjustment is required. If the sugar output deviation is large (>1ml) in normal use, perform rough adjustment (adjust the P1 value)
Coarse Tuning: Long press the "set" button for 5 seconds to display P1, short press the "set" button to enter P1, and display the quantitative value (the P1 value defaults to 25, and all quantitative keys share the same P1 value). Press the up and down keys to adjust, increase the value of P1 when the amount of sugar is too low/decrease the value of P1 when the amount of sugar is too large, press the "Save" button twice to exit. Put the measuring cup, display "E-dy" and press the 1-1 button to discharge the sugar. After the sugar discharging is completed, the sugar amount is detected. If the deviation of the sugar output is very small (<1ml), make fine adjustments (adjust the value of P5)
Fine Tuning: Long press the "Settings" button for 5 seconds, P1 will be displayed. Press the ▲ key 4 times to display P5, short press the "Set" key to enter P5. Press the 1-1 key to display the quantitative value. (P5 has no default value, each quantitative key P5 value is different, need to adjust one by one) Press ▲▼ key to increase/decrease the value of P5, press twice "Save" to exit. Put the measuring cup, display "E-dy" and press the 1-1 button to discharge the sugar. After the sugar discharging is completed, the sugar amount is detected. Set the sugar output of 1-2 keys to 15ml, wait for the screen to display "E-dy", short press the "set" key, press 1-2 keys to display the quantitative value. Press ▲▼ key to set the 1-2 value to 15, and press "Save" once to exit. Put the measuring cup, display "E-dy" and press 1-2 to give out sugar. After discharging sugar, the amount of sugar is detected.
Package List:
1 x Fructose Machine
1 x Machine Cover
2 x Washer
1 x Mixing Spoon
1 x Measuring Cup
1 x Spring
1 x English Manual
Note:
1. When supplementing fructose, pour fructose slowly along the wall of the barrel to avoid fructose producing a large number of bubbles and affecting the output accuracy
2. Do not pour out the fructose/water in the fructose machine upside down or inclined, otherwise the fructose or water will penetrate into the circuit board from the and cause short circuit damage
3. The machine should use a 10A socket, which must be connected to a standard leakage protector and well grounded
4. It is strictly forbidden to clean the machine with boiling water
5.Dear customer, please rest assured to buy without worrying about the plug adaption. We will provide an adapter for you according to different country standard for ensuring its normal use.
