Alternator Generator Governor Actuator ADC120-12V OR ADC120-24V + ESD5500E + 3034572 + MSP675
100% New 4-in 1 :Alternate version ADC120-12 OR 24V Actuator PERFORMANCE: Available Torque Max1.0Lb-ft(1.4Nm) Maximum Operating Shaft Angular Travel 25+/- 1degree CW/CCW 1A at 24VDC 3 A at 24VDC ENVIROMENTAL: Temperature Range -54 to 95 Relative Humidity up to 100% All Surface finishes Fungus proof and corrosion resistant PHISICAL: Weight 2.3 kg Mounting Any position, electrical connector at the top preferred RELIABILITY: Vibration up to 20G @50-500 Hz Testing 100% Tested MATING HARDWARE Connector Supplied With Actuator Lever LE1500-2 Rod End Bearings(to attach a 12#20 HD linkage rod to lever) BR100(Right Hand) BR101(Left Hand) Wiring Harness ADC120 4ft. Harness supplied with actuator, other length available from Actuator colour:gray Material:metal size:16*16*14cm ESD5500E diesel generator speed control SPECIFICATIONS&PERFORMANCE: PERFORMANCE Isochronous Operation/Steady State Stability.......................................... ± 0.25% or better Speed Range/Governor .............................................................. 1K7.5K Hz continuous Speed Drift with Temperature .................................................................... ± 1% Maximum Idle Adjust CW .................................... ............................................ 60% of set speed Idle Adjust CCW .................................................................................. Less than 1200 Hz. Droop Range ........................................................................................... 1 5% regulation* Droop Adj. Max. (K-L Jumpered) ................................... 400 Hz., ± 75 Hz. per 1.0 A change Droop Adj. Min. (K-L Jumpered) ....................................... 15 Hz., ± 6 Hz. per 1.0 A change Speed Trim Range ........................................................................................... ± 200 Hz. Remote Variable Speed Range ............................................. 500 7.5 Hz. or any part thereof Terminal Sensitivity J .................................... .............................. 100 Hz., ± 15 Hz / Volt @ 5.0 K Impedance L ....................................... ....................... 735 Hz., ± 60 Hz / Volt @ 65 K Impedance N ............................................................. 148 Hz., ± 10 Hz / Volt @ 1 Meg. Impedance P ..................................................................................... 10 VDC Supply @ 20 ma Max. ENVIRONMENTAL Ambient Operating Temperature Range .... ............ -40° to +180°F (-40° to +85°C) Relative Humidity .......................................................... up to 95% All Surface Finishes.............................................. Fungus Proof and Corrosion Resistant INPUT POWER Supply ......... ..... 12 or 24 VDC Battery Systems (Transient and Reverse Voltage Protected) Polarity ....................................................................... Negative Ground (Case Isolated) Power Consumption ........................................ 50 ma continuous plus actuator current Actuator Current Range @ 77°F (25°C) - (Inductive Load) ....................... Min. 2.5 Amps, Max. 10 Amps continuous Speed Sensor Signal ............................................................................ 0.5120 Volts RMS RELIABILITY Vibration ................................................................................................. 1G @ 20100 Hz. Testing ................................................................................. 100% Functionally Tested PHYSICAL Dimensions ........................................................................... See Outline (FIGURE 1) Weight ............................................................................................... 1.2 lbs (545 grams) Mounting ..................................................................... Any Position, Vertical Preferred Magnetic Pickup (MPU) 3034572 Speed Sensor Measure range: 50-5000Hz Inductance: 142MH+25%Thread Size: 5/8-18 UNF-2A Tap Drill Size: 37/64 inch Proximity to Gear Teeth: .028 in min. - .042 in max.(Approximately 1/2 to 3/4 turn) Temperature Range: -55 deg C to 105 deg C Output at Cranking Speed: 1.5 volts AC minimum Maximum Output: 30 volts AC Coil Resistance: 300 ohms maximum MSP675 Magnetic Pickup MPU Generator Speed Sensor Range:50-5000Hz Inductance value:142MH+25% Resistance value:300Ω MAX Thread:5/8-18UNF-2A Off-tooth distance:0.64-0.89mm Temperature range:-55℃ celsius to 105℃ Idle output:1.5 volts AC Min MAX output:30 volts AC What in Package: 1 x ADC225 1 x ESD5500E 1 x 3034572 1 x MSP675 |