Our part is laser cut from thick High Carbon Steel, it features our usual glossy black finish
StreetRays [Originals] lean spacer will even out the front of your Tacoma / 4Runner truck in a simple way. The spacer can be installed in about 1 hour with basic tools.
Uneven front height or "lean" is a common issue with all Tacomas, 2WD PreRunner and 4Runners. Most Tacoma and
4Runners have a lower static ride height on the driver side, typically 0.5" to 1" lower than the passenger side. This is
usually due to the extra vehicle parts located on the driver side of the truck such as fuel tank, battery, steering column,
the driver, etc. Our lean spacer will slide right in and fix that uneven problem for you for a small price. We can assure
you that our spacers are the strongest on the market and come with a 100% satisfaction guarantee and Full Warranty.
Our kit will also include all the correct hardware and a general instruction. We recommend professional installation if
you don't have the correct set of tools.
IMPORTANT NOTE: The lift spacer thickness and final lift amount is Not a 1 to 1 ratio due to the suspension geometry.