Waveshare FT232 Module Mini/Type A/Micro/Type C Interface FT232RL USB To UART Module 3.3-5V USB To UART Board USB To Serial Port

Feature:
1. Original FT232RL Chip for Enhanced Stability: The FT232 module features the original FT232RL chip, ensuring a much higher level of stability compared to counterfeit products. Customers can trust in its reliable performance and durability.
2. Wide Compatibility with Multiple Operating Systems: This USB to UART module supports various operating systems, including Mac, Linux, Android, WinCE, and Windows 7/8/8.1/10. It offers flexibility for users across different platforms.
3. Three Power Supply Modes: The USB to UART board supports three power supply modes: 5V external power, 3.3V external power, or external power ranging from 3.3V to 5V. Users can choose the appropriate mode based on their specific requirements.
4. LED Indicators for Easy Monitoring: Equipped with three LED (TXD LED, RXD LED, POWER LED), this serial converter allows users to conveniently monitor the status of transmission, reception, and power. The LED provide visual feedback for seamless operation.
5. Versatile Pin Layout: The USB to serial port features a pin layout that includes TXD, RXD, RTS#, and CTS# pins with bent headers for easy connection. Additionally, it offers reserved solder pads for other functions, allowing users to integrate the module into their system using either top or bottom insertion and providing compatibility with prototyping boards.

 

Specification:
Origin: Mainland China
Accessory Type: Extension Board
Compatible With: Waveshare
Use: Serial level conversion
Product Size:
Type A interface: 44.45 x 19.05mm/1.75 x 0.75inch
Micro interface: 44.81 x 19.05mm/1.76 x 0.75inch
Mini: 46.17 x 19.11mm/1.81 x 0.75inch
Type C connector: 44.45 x 19.05mm/1.75 x 0.75inch
VCClO: Output 3.3V or 5V (module powered by USB, must jump the jumper cap to 3.3V or 5V)
GND: connect to GND 
TXD: connect to MCU.RX (signal flow: MCU.RX<<FT232<<PC.TX)
RXD: connect to MCU.TX (signal flow: MCU.TX>>FT232>>PC.RX)
RTS: connect to MCU.CTS (signal flow direction: MCU.CTS<<FT232<<PC.RTS)
CTS: connect to MCU.RTS (signal flow direction: MCU.RTS>>FT232>>PC.CTS)
This product does not come with USB cable. The module is USB to TTL level, do not connect directly to the RS232 level, so as not to burn the module.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.