This is an old vacuum tube radio made by Futaba Electric with a large, well-colored horn (Φ 41cm D 55cm, made of steel, and coupling to the speaker box uses 5 commercially available "water pipe parts"). The exterior is well-styled and well-balanced, and although it has some signs of use and handmade appearance due to age, it is in good condition thanks to oil stain and varnish painting in a similar color. A total of 4 old ST tubes were used: ``6W-C5 / UZ-6D6 / 6Z-P1 / KX-12F'', and this time the speakers were ``OPT & Toshiba (TSB 401・8Ω 1,5W)'' which I had on hand. ・Equipped with an oval (12,5 x 8 cm) permanent speaker. In the explanation of dial operations, etc., from the left side of the front section, "dB meter (VU meter / senses the volume of the speaker and drives it. Diode rectification from the secondary 8Ω line of the speaker's output transformer. Install a 200Ω resistor." ) / Power switch / Radio (UP) - PU (DOWN / monaural sound, but audio input from CD iPhone etc. is possible) Changeover switch /// Radio - PU Volume / Main variable capacitor drive / For regenerative variable capacitor drive.” The main restoration work this time was to ``replace the power cord and speaker cord with safety in mind; the electrolytic capacitor was in good condition when inspected with a tester, so it was determined that there was an error in the existing condition/wiring system near the volume volume, etc. I had it, so I rewired it to the normal condition / The shaft mounting nut for the recycled variable capacitor was out of stock, so I fixed it securely with what I had on hand / There were 4 to 5 solder spots and solder floats. I re-soldered these items to restore the condition, added a new external input PU cord/terminal, performed oil maintenance on each rotating part of the variable capacitor, etc. to make it a fully functioning item. The inside and outside of the chassis has been cleaned, and the switch and volume have no scratchy noises.It is an electrical cultural object that has been restored and maintained, and is in perfect working condition.The exterior is made by myself using original ideas and ideas.The electrical cultural object is the only one in the world. Why not listen to the nostalgic sounds of this large, trumpet-style, old-fashioned vacuum tube radio with nice colors, made by Futaba Electric (National Type 2 Receiver), which has been refurbished and is in working condition, with an exterior that you made yourself. Size: Width 48,5 cm / Total height 72,5 cm / Total depth 52 cm (height of the main body is 28,5 cm / D 33 cm, and the trumpet part can be removed and swung), total weight about 7, It consists of 5Kg.
●Product shipping: This time, it is possible to remove the wrapper and place it horizontally for shipping in one package.
◯ 1inch=2.54cm(25.4mm)
Cost : $FREE
Stock No. -