Feature:
- Detects SF-6 in high voltage circuit breakers.
- Detects cleaning agents used in dry cleaning applications.
- Detects leaks in other systems and storage/recovery containers.
- Detects Ethylene Oxide gas leaks in hospital sterilizing equipment.
- Detects halogen gas and most gases which contain chlorine, fluorine and bromine.
- Detects all kinds of halogenated refrigerants including but not limited to CFCs, HCFCs, and HFCs.
- With precise ultra-low power consumption IC design, can be automatically adjusted to the best optimum detecting state.
Operation Instruction:
- Install 4 x AAA battery(not included)
- Turn the knob clockwise to turn on the leak detector, after 6 seconds, it turns into stand-by mode and begins to beep regularly. Then you can start detecting the leak.
- The detector will beep regularly at a slow frequency when turn it on. If leak detected, it will beep in a higher frequency. (2 beeps per second when the detector is open, 10 beeps per second when detect the leak)
- The sensitivity increases from 1 to 7 in sequence
- This Freon leak detector is designed with corona sensor so the probe should be very close to the gas leak area.
- Widely applied on pipe leakage, automobile air conditioner, cold storage, refrigerator repair and so on.
Specification:
Reset the time: 2-10 seconds
Working temperature: 0 °C ~ 52 °C.
Maximum sensitivity: 6gr/yr(halogen refrigerants).
Battery life: about 50 hours under normal use.
Response time: instantaneous
Preheating time: about 6 seconds.
Operating mode: continuous, unlimited
Fixed probe length: 20cm (7.87 inches)
Dimension: 22.9 cm x 6.5 cm x 6.5 cm (9.01 x 2.56 x 2.56 inches).
Electricity source: DC6V , 4 x AAA batteries(not included)
Package include:
1 x Instruction manual
1 x Carrying pouch
1 x Halogen leak detector with probe