Application environment:
This is a receiver with its own male and female cable, which can be directly connected to the male connector of the power supply and the female connector of the device, eliminating the trouble of wiring. Wide voltage DC3.7V-24V can be used.
Input DC3.7V-24V, output DC3.7V-24V,
Output=Input, For example: input DC5V, output DC5V,input DC24V, output DC24V.
Note:
We would suggest you to purchase our remote control for the better working performance.
Transfers distance: 50m.
If you need it to work with your own receiver, you must make sure 100% that your receiver is 433mhz Frequency,does your receiver have a learning button to learn the transmitter code? and does your receiver can be compatible with 1527 ic chip transmitter.
Different options include different packages:
Package 1 Included: Only 1 EV1527 Learning codeRemote Control * 1pcs (Battery included);
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
Note:This items send out without retail Package ,but we will pack it well before shipped out.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode: Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s , the relay disconnect automatically.
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code :( Latching )
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,LED flash for 3 times .Push the remote button B .Led indicator flash for 3 times and then come off,
learning successfully.A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be on .
Push the remote button , LED indicator flashes 3 times and then off, learning successfully .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
NOTE: The system can store for 15 pcs of remotes , if the remote get more than 15 pcs , the initial remote control will be lost .