Compatibility:

2013 For NISSAN Altima 2.5l L4
2013 For NISSAN Altima 3.5l V6
2014 For NISSAN Altima 2.5l L4
2014 For NISSAN Altima 3.5l V6
2015 For NISSAN Altima 2.5l L4
2015 For NISSAN Altima 3.5l V6
2016 For NISSAN Altima 2.5l L4
2016 For NISSAN Altima 3.5l V6
2016 For NISSAN Maxima 3.5l V6
2017 For NISSAN Altima 2.5l L4
2017 For NISSAN Altima 3.5l V6
2017 For NISSAN Maxima 3.5l V6
2018 For NISSAN Altima 2.5l L4
2018 For NISSAN Altima 3.5l V6
2018 For NISSAN Maxima 3.5l V6

Features:

• -Aluminum construction to ensure heat transfer efficiency
• -Louvered aluminum fins and tubes are bonded through a unique furnace-brazing process with premium quality aluminum for maximum heat dissipation
• -Each product is quality inspected and 100% tested
• -Lightweight Direct Bolt-On OEM Fitment or Replacement
• -Guaranteed Exact Fit for easy installation

Know about the AC Condenser:

• Function: The role of the condenser is to convert the high-temperature, high-pressure gaseous refrigerant sent by the compressor into a liquid refrigerant, and the refrigerant is dissipated in the condenser to change its state. Therefore, the condenser is a heat exchanger that dissipates the heat absorbed by the refrigerant in the car to the atmosphere through the condenser.
• The AC Condenser: The condenser is mainly composed of pipes and fins, with a refrigerant inlet and an outlet
• Location: The condenser of a small car is usually installed in the front of the car (usually installed in front of the radiator), and is cooled by a fan (the condensing fan is generally shared with the radiator fan, and some models use a dedicated condenser fan). However, Most late-model condensers cannot be flushed due to multiple flow paths, and must be replaced if restricted.

​

Cleaning method of automobile condenser:

• Open the cover and unscrew the fixing screws of the front center net;
• Disassemble the front middle network and put it away;
• Use a prepared toothbrush or brush to brush the condenser from top to bottom, the purpose is to clean up the catkins and debris on the surface;
• After assembling the water gun and water pipe, and checking that the installation is firm, turn on the faucet, adjust the pressure of the water gun not to be too high, and be sure to clean the condenser from top to bottom. Do not clean from left to right to avoid damage to the condenser heat dissipation. piece;
• When all surfaces of the condenser are cleaned, a lot of black dirty water will flow out from the lower part of the car. At this time, continue to clean. When the outflowing water is clean and transparent, it means that the condenser and water tank have been cleaned. The reverse order of disassembly and assembly is restored, and the cleaning is complete.

Package:

1 x of brand new ac condenser