SME 3009 - 3012, etc. in general Double-layer base Garrard Garrard301 / 401 Torrens, etc.
Product Description.
SME Arm Base. It is designed for use with tall turntables like Garrard Garrard 301 / 401, as well as other turntables.
It is recommended as a spacer for turntables with height like Garrard 301 / 401 as well as for other turntables.
It is recommended as a spacer for turntables with height like Garrard 301 / 401 as well as other turntables, and as a vibration countermeasure for bearings.
The base itself fits all the arms sold by SME.
Part numbers 3009-3012, R, SII, SIII, IMP, IV, V, and M series.
The item for sale is the arm base shown in the second photo, and the wood screws are M2.4 x 20mm and
and M2.6 x 25mm wood screws.
The environmental conditions for installation may vary, so if you cannot use the included screws, please contact us.
Please prepare separately according to the environment.
Knife-edge arms are particularly susceptible to unwanted vibrations, or better said, resonance, at the installation point.
Knife-edge arms are particularly susceptible to unwanted vibrations or resonances in the installation area.
The material is solid rosewood (ebony) with lead plates pressed and laminated between the wood.
The material is solid rosewood (ebony) with a lead plate press-laminated between the wood to suppress unwanted resonance while maintaining the natural resonance of the wood.
Rosewood (ebony), like ebony, is a very hard, heavy, and dense wood.
It is a very hard, heavy and dense wood like ebony. It is a very expensive wood used to adjust the resonance of acoustic guitars and other instruments.
It is a very expensive wood used for acoustic tuning of acoustic guitars.
It is made 3mm larger in circumference than the SME arm slide base by 3mm.
The tone arm and turntable in the photo are not exhibited.
Cost : $FREE
Stock No. -