We all have PCI Products in the range.
PCI Flexmörtel® S1
Deformable tile adhesive for all ceramic coverings
Product features:
Corresponds to C2TE S1 according to din EN 12 004 and “Guideline for flexible mortar”.
Deformable, compensates for stresses resulting from temperature fluctuations and shrinkage.
High stability, even with heavy plates.
For adhesive bed thicknesses from 1 to 10 mm.
Very low emissions, GEV EMICODE EC 1 PLUS R.
Low in chromate according to TRGS 613.
Waterproof and temperature-resistant from – 30 °C to + 80 °C, universally usable indoors and outdoors, on walls and floors.
EMICODE: EC 1 PLUS R
Areas of application:
For indoor and outdoor.
For walls and floors.
For the deformable bonding of tiles and panels.
For covering cement screeds with a residual moisture content of < 4% CM.*
For laying ceramics on Allen PCI composite seals.
For laying on heated screeds.
For installation in swimming pools, pool surrounds, wet rooms and cold stores.
For laying on mastic asphalt (indoor use only) as well as Allen cement and gypsum-bound installation substrates,
Glass and porcelain mosaic, adhesive PVC coverings and old ceramic coverings.
For laying polyurethane foam panels on basement walls in contact with the ground (perimeter insulation) on plaster, concrete,
masonry and sealing slurries; for mineral fiber boards (e.g. Isover or Rockwool), for sawn rigid foam boards (e.g. Styrofoam or Hostapor),
for extruded rigid foam panels (e.g. Styrodur).
For repairing and leveling out minor unevenness on walls and floors, before laying tiles and slabs.
Color:
Gray
Delivery form:
5kg bag
Safety notice:
Keep out of reach of children.
Always read the label and product information before use.
Prompt purchases will be combined, please request the total amount before paying (after purchase).
Product: PCI FLEXMOERTEL S1
Hazardous component(s) for labeling:
Cement, Portland, chemicals
Signal word: Danger
Danger warnings:
H318 Causes serious eye damage.
H315 Causes skin irritation.
H335 May cause respiratory irritation.
Safety notice:
P102 Keep out of reach of children.
Safety instructions (prevention):
P280 Wear protective gloves and eye/face protection.
P261 Avoid breathing dust.
P264 Wash thoroughly with plenty of soap and water after use.
Safety information (reaction):
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
If possible, remove any contact lenses. Continue rinsing.
P315 Get medical advice/attention immediately.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 + P364 Remove contaminated clothing and wash before reuse.
dewabit